UNITED STATES SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

For the Fiscal Year Ended June 29, 2024

Or

For the transition period from

to

Commission File Number 000-49602

SYNAPTICS INCORPORATED

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by checkmark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☒

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of Common Stock held by nonaffiliates of the registrant (29,062,270 shares), based on the closing price of the registrant’s Common Stock as reported on the Nasdaq Global Select Market on December 29, 2023 of $114.08, was $3,315,423,762. For purposes of this computation, all officers, directors, and 10% beneficial owners of the registrant are deemed to be affiliates. Such determination should not be deemed to be an admission that such officers, directors, or 10% beneficial owners are, in fact, affiliates of the registrant.

As of August 16, 2024, there were 39,582,719 shares of the registrant's common stock outstanding.

Documents Incorporated by Reference

SYNAPTICS INCORPORATED

FORM 10-K

FOR THE FISCAL YEAR ENDED JUNE 29, 2024

TABLE OF CONTENTS

Cautionary Note Regarding Forward-Looking Statements

This report on Form 10-K for the year ended June 29, 2024, contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which are subject to the “safe harbor” created by those sections. Forward-looking statements give our current expectations and projections relating to our financial condition, results of operations, plans, objectives, future performance and business, and can be identified by the fact that they do not relate strictly to historical or current facts. Such forward-looking statements may include words such as “expect,” “anticipate,” “intend,” “believe,” “estimate,” “plan,” “target,” “strategy,” “continue,” “may,” “will,” “should,” variations of such words, or other words and terms of similar meaning. All forward-looking statements reflect our best judgment and are based on several factors relating to our operations and business environment, all of which are difficult to predict and many of which are beyond our control. Such factors include, but are not limited to, the risks summarized herein and identified in the “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business” sections in this report on Form 10-K, and other risks as identified from time-to-time in our Securities and Exchange Commission reports. Forward-looking statements are based on information available to us on the date hereof, and we do not have, and expressly disclaim, any obligation to publicly release any updates or any changes in our expectations, or any change in events, conditions, or circumstances on which any forward-looking statement is based. Our actual results and the timing of certain events could differ materially from the forward-looking statements. These forward-looking statements do not reflect the potential impact of any mergers, acquisitions, or other business combinations that had not been completed as of the date of this filing.

Statements made in this report, unless the context otherwise requires, include the use of the terms “us,” “we,” “our,” the “company” and “Synaptics” to refer to Synaptics Incorporated and its consolidated subsidiaries.

PART I

ITEM 1. BUSINESS

Overview

We are a leading worldwide developer and fabless supplier of premium mixed signal semiconductor solutions that enable people to engage with connected devices and data, engineering exceptional experiences throughout the home, at work, in the car and on the go. We provide our customers with sensing, processing, and connecting solutions, which represent the three foundational elements of the Internet of Things, or IoT. We supply connectivity, sensors, and artificial intelligence, or AI, enhanced processor solutions to original equipment manufacturers, or OEMs, that design IoT products and devices for automobiles, enterprise workspace devices, virtual reality, smartphones, tablets, and notebook computers. Our currently served markets include IoT, personal computer, or PC, Enterprise and Automotive, and Mobile. Our solutions either contain or consist of our wireless, voice and speech, video processing, fingerprint, authentication, display driver, or touch semiconductor solutions, which include our hardware, and, where applicable, firmware and software.

Our website is located at www.synaptics.com. Through our website, we make available, free of charge, all our Securities and Exchange Commission, or SEC, filings, including our annual reports on Form 10-K, our proxy statements, our quarterly reports on Form 10-Q, and our current reports on Form 8-K, as well as Form 3, Form 4, and Form 5 Reports for our directors, officers, and principal stockholders, together with amendments to those reports filed or furnished pursuant to Sections 13(a), 15(d), or 16 under the Securities Exchange Act of 1934, as amended, or the Exchange Act. These reports are available on our website promptly after their electronic filing with the SEC. You can also read these SEC filings and reports over the Internet at the SEC’s website at www.sec.gov. Our website also includes corporate governance information, including our Code of Conduct, our Code of Ethics for the Chief Executive Officer and Senior Financial Officers, and our Board Committee Charters. The contents of our website, including the content contained in any website addresses or links included elsewhere in this report, are not incorporated into or deemed to be a part of this report.

We were initially incorporated in California in 1986 and were re-incorporated in Delaware in 2002. Our fiscal year is the 52- or 53-week period ending on the last Saturday in June. The fiscal years presented in this report are the 53-week period ended June 29, 2024 and 52-week periods ended June 24, 2023, and June 25, 2022.

Core IoT Applications Market

Our Core IoT market solutions center around three foundational elements of IoT devices: sensing, processing, and connecting. We Sense, Process, and Connect by capturing critical data with diverse sensors, processing it efficiently at the device’s edge, and ensuring seamless device connectivity. Our integrated approach delivers a dependable and innovative IoT experience, powering a smarter, connected world.

Our solutions broadly consist of wireless connectivity (Wi-Fi, Bluetooth, Bluetooth Low Energy, Zigbee, Thread, global positioning system, or GPS, and Ultra Low Energy, or ULE) products, System-on-Chip, or SoC, products, and our Astra family of AI-native edge processors. Our products enable smart devices at the edge of a network such as smart assistant speakers, over-the-top multimedia devices, wireless speakers, appliances, set-top boxes, high-speed connectivity for virtual reality devices, video surveillance and voice over IP SoCs.

We continue to expand our footprint in various devices by bringing converged video, vision, audio, and voice technologies coupled with artificial intelligence and wireless connectivity capabilities. Our deep investment in far-field voice technology, our intellectual property portfolio for video, vision, audio and security, and our significant experience enabling Android-based platforms for service providers, coupled with our focus on enabling high performance, low power, and highly secure SoC solutions enable us to effectively serve our existing customers and position us to grow our addressable market.

Enterprise and Automotive Product Applications Market

Our Enterprise product applications include solutions for PCs, a wide range of audio and video products and solutions for enterprise workspaces. We provide custom and semi-custom product solutions for navigation, cursor control, access to devices or applications through fingerprint authentication, and user presence detection solutions, for many of the world’s premier PC OEMs. These functions are offered as both stand-alone and integrated touch pads plus fingerprint biometric solutions and as chipsets with integrated visual sensing software algorithms. In addition to notebook applications, other PC product applications for our technology include peripherals, such as high-end keyboards and accessory touchpads. Our products enable voice driven intelligent devices including those integrating far-field technology, personal voice and audio products, video interface solutions for docking stations, image processing solutions for use in printers, and fax modems.

Our Automotive product applications include display and touch integrated circuits for use in automobiles. Our automotive solutions include over a decade of mass production experience in mature touch solutions and display drivers adapted from our mobile consumer business to meet automotive-grade quality standards.

Mobile Product Applications Markets

Mobile product applications include smartphones, tablets, large touchscreen applications, as well as a variety of mobile, handheld, and entertainment devices. We believe our intellectual property portfolio, engineering know-how, systems engineering experience, technological expertise, and experience in providing human experience product solutions to major OEMs position us to be a key technological enabler for multiple consumer electronic devices targeted to meet the mobile product applications markets.

We believe our existing technologies, our range of product solutions, and our emphasis on ease of use, advanced functionality, small size, low power consumption, durability, and reliability enable us to serve the markets for mobile product applications and other electronic devices.

Acquisitions

Broadcom

In February 2023, we completed the acquisition of certain GPS developed technology intangible assets from Broadcom for an aggregate consideration of $30.0 million, which was paid in cash in the previous fiscal year.

In July 2023, we entered into a transaction with Broadcom to extend the exclusivity period of certain developed technologies and to license certain technology assets for an aggregate consideration of $130.0 million, which was paid in cash in the first quarter of fiscal 2024.

Emza

On October 25, 2022, we acquired all of the outstanding shares of Emza for total purchase consideration of $15.8 million, which was paid in cash. The results of Emza are included in our consolidated financial statements for the periods from October 25, 2022.

Our Strategy

Our objective is to continue to enhance our position as a leading supplier of premium semiconductor product solutions for each of the target markets in which we operate, including the core IoT applications market, the enterprise and automotive product applications market, and the mobile product applications markets, with a key focus on expanding our market share. Key aspects of our strategy to achieve this objective include those set forth below.

Extend Our Technological Leadership

We plan to utilize our extensive intellectual property portfolio, engineering know-how, and technological expertise to extend the functionality of our current product solutions and offer new and innovative product solutions to customers across multiple markets. We intend to continue utilizing our technological expertise to reduce the overall size, cost, and power consumption of our product solutions while increasing their applications, capabilities, and performance. We plan to continue enhancing the ease of use and functionality of our solutions. We plan to invest in our research and development efforts through our engineering activities, including advancement of existing technologies, the hiring of key engineering personnel, and strategic acquisitions and alliances. We believe that these efforts will enable us to meet customer expectations and achieve our goal of supplying, on a timely and cost-effective basis, easy to use, functional human experience semiconductor product solutions to our target markets.

Focus on and Grow in the IoT Market

We intend to capitalize on the growth of the IoT market including connectivity and processor solutions, AI-native applications, virtual reality, and wearables. We intend to build upon our existing innovative and intuitive and intelligent semiconductor product solutions portfolio and continue to address the evolving portability, connectivity, security, and functionality requirements of these new markets. We will offer our solutions to existing and potential customers to enable increased functionality, reduced size, lower cost, simplified security, enhanced industrial design features, and to enhance the user experience of our OEMs’ products. We plan to utilize our existing technologies as well as aggressively pursue new technologies as new markets evolve that demand new solutions.

The semiconductor industry is driving transformation across applications with the use of AI. Our solutions help customers to integrate AI in their edge devices and applications. Since 2017, Synaptics has developed products with integrated neural processing engines to help customers accelerate their AI capabilities. We intend to capitalize on edge AI opportunities with our processor solutions.

Pursue Strategic Relationships and Acquisitions

We intend to develop and expand our strategic relationships to enhance our ability to offer value-added semiconductor product solutions to our customers, penetrate new markets, and strengthen the technological leadership of our product solutions. We also intend to evaluate the potential acquisitions of companies and assets in order to expand our technological expertise and to establish or strengthen our presence and product offerings in selected target markets.

Fabless Semiconductor Manufacturing

We selectively partner with foundries and backend processors to solidify our longstanding key supply chain relationships. This strategy results in a scalable business model, enables us to concentrate on our core competencies of research and development and product design and engineering, and reduces our capital expenditures and working capital requirements. Our fabless semiconductor manufacturing strategy allows us to maintain a variable cost model, in which we do not incur most of our manufacturing costs until our product solutions have been shipped and invoiced to our customers.

Products

Our family of product solutions allows our customers to solve their interface needs and differentiate their products from those of their competitors.

Wireless Connectivity

Our wireless connectivity solutions include state-of-the-art Wi-Fi, Bluetooth, Bluetooth Low Energy, Zigbee, Thread, Matter, GPS, GNSS, and ULE to address broad IoT market applications including home automation, multimedia streamers, security sensors, surveillance cameras, wireless speakers, games, drones, printers, wearable and fitness devices, in addition to numerous other applications which require a wireless connection.

AstraTM

Our Astra family of AI solutions include a scalable portfolio of intelligent edge processors, ranging from highly integrated MPUs to high-performance MCUs architected for an AI-enabled IoT system, a standards-based open software framework, rapid prototyping kits, full-featured AI/ML toolkits, and Synaptics’ Wi-Fi® and Bluetooth® connectivity solutions. Synaptics also provides the Astra™ Machina™ Foundation Series Modular developer kit for Synaptics SL-Series of high-performance embedded processors.

Ultra-Low Power Edge AI

Our ultra-low power edge AI platform includes a highly integrated edge AI SoC designed for battery powered wireless devices equipped with audio or camera capabilities for consumer and industrial IoT applications. These solutions are designed for a wide range of power constrained IoT applications used in office buildings, retail, factories, warehouses, robotics, and smart homes and cities.

Voice Over IP

Our Digital Voice Family, or DVF, of SoC products is a comprehensive solution for developing affordable, scalable and power efficient VoIP, home and office products. DVF facilitates rapid introduction of embedded features into residential devices such as cordless IP and instant messaging phones. Built on an open platform with multi-ARM processors running on Linux OS, DVF includes IPfonePro™, software development kit for IP phones and ATAs.

AudioSmart®

AudioSmart products bring forward optimum analog, mixed-signal and digital signal processor, or DSP, technologies for high-fidelity voice and audio processing. AudioSmart also includes personal voice and audio solutions for high-performance headsets that enable active noise cancellation.

DisplayLink®

Our DisplayLink products utilize highly efficient video encode/decode algorithms to deliver a semiconductor-based solution which transmits compressed video frames across low bandwidth connections. These solutions are used in PC docking applications, conference room video display systems, and video casting applications.

ConnectSmart™

Our ConnectSmart video interface IC portfolio offers a full range of high-speed video/audio/data connectivity solutions that are designed for linking CPUs/GPUs and various endpoints for applications including PC docking stations, travel docks, dongles, protocol converters and virtual reality head mounted displays.

Natural ID®

Our Natural ID family of capacitive-based fingerprint ID products is designed for use in notebook PCs, PC peripherals, automobiles, and other applications. Our Natural ID family of products spans a range of form factors, colors, and materials suitable for design on the front, back or side of a device.

TouchPadTM

Our TouchPad family of products, which can take the place of, and exceed the functionality of a mouse, consists of a touch-sensitive pad that senses the position and movement of one or more fingers on its surface through the measurement of capacitance. Our TouchPad solutions also offer various advanced features, including scrolling, customizable tap zones, tapping and dragging of icons, and device interaction.

ClearPad®

Our ClearPad family of products enables the user to interact directly with the display on electronic devices, such as mobile smartphones, tablets, and automobiles. We typically sell our ClearPad solution as a chip, together with customer-specific firmware, to sensor manufacturers, OLED manufacturers or LCD manufacturers, to integrate into their touch-enabled products.

ClearViewTM

Our ClearView display driver products offer advanced image processing and low power technology for displays on electronic devices, including smartphones and tablets. Our virtual reality bridge and virtual reality display driver integrated circuit, or DDIC, chips enable our customers to move to higher resolution and faster response displays

TouchViewTM

Our TouchView solutions include our TDDI products that combine two functions, a touch controller, and a display driver, into a single chip that incorporates all the features of our ClearView and ClearPad products. TouchView products are used in large screen devices, including notebooks and tablets, and are also certified for automotive display applications.

Technologies

We have developed and own an extensive array of technologies, encompassing ASICs, firmware, software, mechanical and electrical designs, display systems, pattern recognition, touch-sensing technologies, fingerprint sensing, voice, audio, imaging, modem, and multimedia technologies. We continue to develop technology in these areas. We believe these technologies and the related intellectual property rights create barriers for competitors and allow us to provide high-value human experience semiconductor product solutions in a variety of high-growth markets.

Our broad line of semiconductor product solutions is currently based upon the following key technologies:

In addition to these technologies, we develop firmware and device driver software that we incorporate into our products, which provide unique and advanced features. In addition, our ability to integrate all our products to interface with major operating systems provides us with a competitive advantage.

Proprietary Vector Co-Processor Technology. Our vector co-processor technology is designed for use in our ASICs, accompanying either one of our own proprietary microcontroller cores or a commercially available one. The co-processor boosts an ASIC’s computational performance by efficiently processing vectors of data for a range of mathematical operations. This allows us to implement more computationally intensive algorithms within our firmware.

Multimedia Processing Technology. This technology allows us to create multimedia SoC products for set-top boxes, soundbars, digital personal assistants, smart displays, virtual reality, OTT, audio, and video. Our video processing technology includes hardware and algorithms to reduce analog and digital noise, convert to different video formats, and enhance color and contrast. Our products include security and secure encrypt/decrypt technology, including secure boot and hardware root of trust.

Voice and Audio Technology. This technology allows us to develop human experience and communication products based on voice and audio interaction. The technology embodies a broad range of analog and mixed signal circuits expertise and audio signal processing algorithms, including:

Pattern Recognition Technology. This technology is a set of software algorithms and techniques for converting real world data, such as gestures and handwriting, into a digital form that can be recognized and manipulated within a computer. Our technology provides reliable gesture decoding and handwriting recognition and can be used in other applications such as signature verification for a richer user experience.

Deep Learning and Neural Network Inferencing Technology. This technology allows us to create and train deep neural networks for audio, image processing, video processing and computer vision functions. Some of our products contain hardware designed to evaluate deep neural networks securely and with low latency. We also have technology that allows us to compress our trained neural networks for more efficient AI-at-the-edge on our hardware. These neural network algorithms improve the quality of the sensed data (for example, reduce the noise, or increase the resolution) as well as interpret the sensed data.

Mixed-Signal Integrated Circuit Technology. This hybrid analog-digital integrated circuit technology combines the power of digital computation with the ability to interface with non-digital, real-world signals, such as the position of a finger or stylus on a surface. Our patented design techniques permit us to utilize this technology to optimize our core ASIC engine for all our products. Our mixed-signal technology consists of a broad portfolio of circuit expertise in areas such as the following:

Wireless Technology. Our wireless connectivity solutions include discrete and integrated Wi-Fi and Bluetooth solutions, and satellite-based GPS/GNSS mobile navigation receivers. Wi-Fi allows devices on a local area network to communicate wirelessly, adding the convenience of mobility to the utility of high-speed data networks. We offer a family of high performance, low power Wi-Fi chipsets. We offer products which incorporate the latest Wi-Fi standards such as 802.11AX, which is known as Wifi-6 and Wifi-6E. Bluetooth is a low power technology that enables direct connectivity between devices. We offer a family of Bluetooth silicon and software solutions that enable customers to easily and cost-effectively add Bluetooth functionality to virtually any device, including Bluetooth 6.0 and Bluetooth Enterprise True Wireless Stereo (TWS). These solutions include combination chips that offer integrated Wi-Fi and Bluetooth functionality, which provides significant performance advantages over discrete solutions.

We also offer a family of GPS and GNSS semiconductor products, software, and location data services. These products are part of a broad location platform that enable customer devices to wirelessly communicate and receive precise location and navigational data from satellite constellations for use in various location services applications.

As part of our wireless technology, DECT based devices provide worldwide coverage for telephony applications, supporting most RF bands and cordless protocols standardized around the world. This includes 1.7GHz -1.9GHz used in Europe, U.S., Korea, Japan and Latin America; and 2.4GHz – used in Japan, China, India and the U.S., along with other proprietary protocols for specific use cases.

Video Compression Technology. Our video interface solutions include our ConnectSmart and DisplayLink portfolios, offering a full range of interface solutions that connect devices to external displays and support the latest versions of the most widely used protocols, connectors, and operating systems. Our flexible product lines for connecting devices combine high-performance interface with low power consumption and are designed for both commercial and consumer end-products. Our solutions have been broadly adopted by the top OEMs and original device manufacturers, or ODMs, to enable video expansion and protocol conversion, leverage high-end features, and deliver the bandwidth needed to drive multiple high-resolution external displays simultaneously.

Imaging and Modem Technology. This technology allows us to create a family of SoC integrated circuits and software for printers, video cameras, fax machines and modems. Key functional blocks include:

Capacitive Fingerprint Sensing Technology. Our fingerprint sensing technology simplifies the system or application authentication process by substituting the user’s fingerprint for the login name and password. Our capacitive fingerprint sensing technology provides for fingerprint authentication by scanning and matching an image of a user’s fingerprint, as well as initial fingerprint enrollment. Our sensing technology also incorporates spoof detection and includes many implementation choices including the back of the phone or PC, button integration, touchpad integration, and under glass.

Capacitive Position and Force Sensing Technology. Our Position Sensing technology provides a method for sensing the presence, position, and contact area of one or more fingers or a stylus on a flat or curved surface. Our technology works with very light touch, supports full multi-touch capabilities, and provides highly responsive cursor navigation, scrolling, and selection. It uses no moving parts, can be implemented under plastic or glass, and is extremely durable. Our technology can also track one or more fingers in proximity to the touch surface. Our Force Sensing technology senses the direction and magnitude of a force applied to an object. Our electronic circuitry determines the magnitude and direction of an applied force, permits very accurate sensing of tiny changes in capacitance, and minimizes electrical interference from other sources. Our capacitive force sensing technology can be integrated with our position sensing technology.

Capacitive Active Pen Technology. This technology allows us to develop a pen that can be used for input on a capacitive touchscreen. As well as generating a signal that allows the touchscreen to track the pen, additional data, such as the pen applied force and pen button states, are also communicated to the touchscreen device. Information can also be communicated from the touchscreen to the pen.

Multi-touch Technology. This technology allows us to create capacitive touch products that simultaneously track the presence, position, and other characteristics of multiple objects in contact with or in close proximity to a flat or curved touch surface. It enables, for example, the recognition of multi-finger gestures, the tracking of a stylus position while the user’s palm is also in contact with the touch surface, and the simultaneous interaction of multiple users with the same touch surface.

Display Systems and Circuit Technology. This technology enables us to develop optimized human experience semiconductor product solutions with improved compatibility with their application environments. This technology consists of mobile and large format display semiconductor expertise, including the following functional blocks:

This technology also enables us to develop advanced products that combine the functions of the display and touch sensing systems to enable highly integrated display and touch functionality with improved performance, thinner form factors, and lower system cost.

Our latest addition to our automotive portfolio is an automotive-grade TDDI for indium gallium zinc oxide and amorphous silicon gate-in-panel displays and low-temperature polycrystalline panels up to 4K resolution.

Research and Development

We conduct ongoing research and development programs that focus on advancing our existing technologies, improving our current product solutions, developing new products, improving design and manufacturing processes, enhancing the quality and performance of our product solutions, and expanding our technologies to serve new markets. Our goal is to provide our customers with innovative solutions that address their needs and improve their competitive positions.

Our research and development programs focus on the development of accurate, easy to use, reliable, and intuitive human experiences for electronic devices. We believe our innovative interface technologies can be applied to many diverse products, and we believe the interface is a key factor in the differentiation of many products. AI-at-the-edge is a focus area for us in enabling better performance and enhancing user experience in many of these products. We believe that our technologies enable us to provide customers with product solutions that have significant advantages over alternative technologies in terms of functionality, size, power consumption, durability, and reliability. We also intend to pursue strategic relationships and acquisitions to enhance our research and development capabilities, leverage our technology, and shorten our time to market with new technological applications.

Our research, design, and engineering teams frequently work directly with our customers to design custom solutions for specific applications. We focus on enabling our customers to overcome their technical barriers and enhance the performance of their products. We believe our engineering know-how and electronic systems expertise provide significant benefits to our customers by enabling them to concentrate on their core competencies of production and marketing.

As of the end of fiscal 2024, we employed 1,248 people in our technology, engineering, and product design functions in the United States, China, Taiwan, Japan, Israel, the United Kingdom, India, Germany, Poland, and Korea.

Intellectual Property Rights

Our success and ability to compete depend in part on our ability to maintain the proprietary aspects of our technologies and products. We rely on a combination of patents, trademarks, trade secrets, copyrights, confidentiality agreements, and other statutory and contractual provisions to protect our intellectual property, but these measures may provide only limited protection.

As of June 2024, we held 2,603 active patents and 555 pending patent applications worldwide that expire between 2024 and 2044. Collectively, these patents and patent applications cover various aspects of our key technologies, including those for touch sensing, voice processing, secure biometrics, display drivers, touch and display integration, docks and adapters, video interfaces, wired and wireless connectivity, audio processing, video processing, edge computing, open AI tools, and computer vision. Our proprietary firmware and software, including source code, are also protected by copyright laws and applicable trade secret laws.

Our extensive array of technologies includes those related to ICs, firmware, software, and mechanical hardware. Our products rely on a combination of these technologies, making it difficult to use any single technology as the basis for replicating our products. Furthermore, the lengths of our customers’ design cycles and the customizations required within the products we provide to our customers also serve to protect our intellectual property rights.

Customers

Our customers include many of the world’s largest mobile and PC OEMs, based on unit shipments, as well as many large IoT OEMs, automotive manufacturers and a variety of consumer electronics manufacturers. Our demonstrated track record of technological leadership, design innovation, product performance, cost-effectiveness, and on-time deliveries have resulted in our leadership position in providing human experience semiconductor product solutions. We believe our strong relationship with our OEM customers, many of which are also currently developing product solutions which are focused in several of our target markets, will continue to position us as a source of supply for their product offerings.

We generally supply our products to OEMs through their contract manufacturers, supply chain or distributors. We consider both the OEMs and their contract manufacturers or supply chain partners to be our customers, as well as in some cases, our distributors. Both the OEMs and their partners may determine the design and pricing requirements and make the overall decision regarding the use of our human experience semiconductor product solutions in their products. The contract manufacturers and distributors place orders with us for the purchase of our products, take title to the products purchased upon delivery by us, and pay us directly for those purchases. The majority of these customers do not have return rights except for warranty provisions.

Sales and Marketing

We sell our product solutions for incorporation into the products of our OEM customers. We generate sales through direct sales employees as well as outside sales representatives, distributors and value-added resellers. Our sales personnel receive substantial technical assistance and support from our internal technical marketing and engineering resources because of the highly technical nature of our product solutions. Sales frequently result from multi-level sales efforts that involve senior management, design engineers, and our sales personnel interacting with our customers' decision makers throughout the product development and order process.

As of the end of fiscal 2024, we employed 216 sales and marketing professionals. We maintain customer support offices domestically and internationally, which are located in the U.S., Taiwan, China, India, Korea, Japan, United Kingdom and Switzerland. In addition, we utilize value-added resellers and sales distributors that are primarily located in the U.S., China, Korea, Japan, Taiwan and Germany.

International sales constituted nearly all of our revenue for each of fiscal 2024, 2023, and 2022. Approximately 66%, 63% and 66% of our sales in fiscal 2024, 2023 and 2022, respectively, were made to companies located in China and Taiwan that provide design and manufacturing services for major IoT, notebook computer, and mobile product applications OEMs. Our sales are almost exclusively denominated in U.S. dollars. See Note 15. Segment, Customers, and Geographic Information in the notes to the consolidated financial statements for additional information on revenue by geographic location and product category.

Manufacturing

We employ a fabless semiconductor manufacturing platform through third-party relationships. We currently utilize third-party semiconductor wafer manufacturers to supply us with silicon wafers integrating our proprietary design specifications. The completed silicon wafers are forwarded to third-party package and test processors for further processing into die and packaged ASICs, as applicable, which are then utilized in our custom module products or processed as our ASIC-based solution.

After processing and testing, the die and ASICs are consigned to various contract manufacturers for assembly or are shipped directly to our customers. During the assembly process, our die or ASIC is either combined with other components to complete the module for our custom product solutions or the ASIC is maintained as a standalone finished good. The finished assembled product is subsequently shipped directly to our customers or by our contract manufacturers directly to our customers for integration into their products.

We believe our third-party manufacturing strategy provides a scalable business model, enables us to concentrate on our core competencies of research and development, technological advances, and product design and engineering, and reduces our capital investment.

Our third-party contract manufacturers and semiconductor fabricators are predominately Asia-based organizations. We generally provide our contract manufacturers with six-month rolling forecasts of our production requirements. As a result of past supply constraints and capacity shortages affecting the global semiconductor industry, we entered into long-term capacity and pricing agreements with some suppliers. Our reliance on these parties exposes us to vulnerability owing to our dependence

on a few sources of supply. In some cases, we have alternative sources of supply to mitigate supplier risk. We may establish relationships with other contract manufacturers in order to reduce our dependence on any single source of supply.

Periodically, we purchase inventory from our contract manufacturers when a customer delays its delivery schedule or cancels its order. In those circumstances in which our customer has cancelled its order and we purchase inventory from our contract manufacturers, we consider a write-down to reduce the carrying value of the inventory purchased to its net realizable value. We charge write-downs to reduce the carrying value of obsolete, slow moving, and non-usable inventory to its net realizable value and charge such write-downs to cost of revenue. We also record a liability and charge to cost of revenue for estimated losses on inventory we are obligated to purchase from our contract manufacturers when such losses become probable from customer delays or order cancellations. In addition, the impact of entering into long-term capacity agreements could create significant inventory write-down if the end customer demand substantially declines.

Competition

IoT

Our diverse SoC solutions integrate artificial intelligence hardware engines, video processing, far-field voice and linguistics processing products and are sold into market segments that offer significant potential growth, ranging from home automation applications, smart assistant platforms, surveillance cameras, to set-top-box/over-the-top, or STB/OTT platforms to a wide variety of embedded products in the broader IoT market. The markets for STB/OTT products, surveillance cameras, home automation, smart assistant solutions and embedded IoT products require strong technology innovation in silicon and software along with deep systems and systems engineering expertise.

We provide voice processing silicon and software solutions for voice-enabled devices, consumer and commercial imaging, and next-generation audio applications. In addition to our voice solutions, we support the audio headphone and virtual reality head mounted display industry with universal serial bus-c, or USB-C, audio codec solutions for next generation wireless audio devices and wearables.

Our wireless products for use in IoT application markets include our technologies such as Wi-Fi, Bluetooth, Wi-Fi-Bluetooth combinations, and GPS/GNSS support our customers’ need to develop products which can wirelessly communicate to networks, remote control of edge-devices, machine-to-machine communication, among other purposes.

Enterprise and Automotive and Mobile

Our touch, display and fingerprint-based semiconductor products are sold into markets for PC product applications, mobile product applications, and other electronic devices. The markets for touchscreen products are characterized by rapidly changing technology and intense competition.

Our automotive products include touch, display driver, SmartBridge, and TDDI solutions for major automotive OEMs. Our IoT video interface products are sold into PC and smartphone docks and wireless adapter market applications.

We also provide fax, modem and image processors and software solutions for printers, fax machines, point of sale terminals, and medical applications.

Corporate Responsibility

We strive to be a leading corporate citizen. We strive to uphold the most ethical standards in our business practices and policies, and we believe that sustainable corporate practices and consistent attention to social and governance priorities will help enhance long-term value for our stockholders. With guidance from our Board of Directors, our management team applies an integrated methodology to financial matters, corporate governance, and corporate responsibility, leading to increased accountability, better decision making and ultimately enhanced long-term value. We consider environment, social, and governance, or ESG, matters in our business goals, strategies and risk management.

We have implemented internal programs and initiatives to reinforce our commitment to reduce our natural resource consumption, improving sustainability, disposing of end-of-life products in an environmentally safe manner, reducing waste, and increasing reuse and recycling programs company-wide.

Our Chief Information Officer, or CIO, also acts as our Chief Sustainability Officer and has responsibility for our Global Workplace Resources function and executes our climate strategy and related issues. Our CIO is responsible for assessing and leading the management of climate-related risks and opportunities, elevating stakeholder concerns and guiding the implementation of climate-related policies, programs and disclosures. As a member of our senior executive team, our CIO is responsible for elevating climate topics to senior leadership and, ultimately, to the Board’s Nominations and Corporate Governance Committee and Audit Committee.

We have adopted a supplier and vendor code of conduct, and businesses in our supply chain are contractually obligated to comply with and support the Responsible Business Alliance (RBA) Code of Conduct. We expect suppliers and vendors to uphold the highest standards of human rights including anti-discrimination and humane treatment, freedom of association and

collective bargaining, prevention of child labor, limits on working hours, minimum fair and living wage, worker feedback and grievance systems. We expect suppliers to exercise due diligence on relevant minerals in their supply chains and to have a policy to reasonably assure that the tantalum, tin, tungsten, and gold in the products they manufacture does not directly or indirectly finance or benefit armed groups that perpetrate serious human rights abuses in the Democratic Republic of the Congo or an adjoining country. Our vendors and suppliers are also required to obtain and maintain all required health and safety permits, provide reasonable working and living conditions, have incident management systems and emergency preparedness and response protocols.

Our Board of Directors is responsible for overseeing our ESG policies and practices generally. The Nominations and Corporate Governance Committee has oversight of ESG strategy and receives regular updates from management on our ESG performance. The Audit Committee provides oversight of business risks and our company’s Code of Conduct. Our Board of Directors receives periodic updates from Nominations and Corporate Governance Committee and management on our ESG performance.

Human Capital

Our company has been built on the collective contributions from people of many countries, religions, and ethnic backgrounds. People are our most critical asset and are the core component behind our success. We want to attract, develop, and retain the world’s best talent. As of June 2024, we employed 1,716 employees. Our workforce is distributed globally across 15 countries with 22% of our employees located in North America, 61% located in Asia Pacific and 17% located in Europe and the Middle East. We believe our company attributes differentiate us in the market and have resulted in a lower voluntary attrition rate relative to benchmark data and a higher retention rate in fiscal 2024. Our employee average tenure globally is 5.0 years.

Our Board of Directors and its committees provide oversight on certain workforce management matters including, among other aspects, leadership development, management depth and strength assessment, diversity, equity, inclusion and belonging, and our employee experience survey results. The Audit Committee is responsible for monitoring our business risks and our company’s Code of Business Conduct and Ethics. The Nominations and Corporate Governance Committee oversees our ESG strategy including talent attraction and retention and inclusion and diversity. The Compensation Committee provides oversight of our overall compensation philosophy, policies, and programs, and assesses whether our compensation establishes appropriate incentives for executive officers and other employees.

Competitive Compensation and Benefits

We provide competitive benefits related to health, wellness, mental health and family resources designed to meet the needs of our diverse global workforce. We have a robust pay for performance philosophy and compensation framework to reward high performance. We align executive compensation with our corporate strategies, business objectives and the creation of long-term value for our stockholders without encouraging unnecessary or excessive risk-taking.

We are committed to proactively caring for the well-being of our employees in an engaging and meaningful way. Almost 50% of our workforce participated in events last year such as global virtual runs and our annual outstep the CEO competition, promoting healthy behavior while raising money for local charities. We also provided opportunities for employees to donate or volunteer their time through various philanthropic programs and events. Additionally, we provided new mental health resources and conducted team building and well-being activities onsite in our global offices.

We also conduct organizational health surveys designed to assess employee engagement, leadership, work environment, and culture. We held an average response rate of 90% for fiscal 2024, which we view as indicative of a high-level of employee engagement.

We invest in our employees, and their professional development by providing opportunities to learn though technical, compliance and other professional training, including through semi-annual development conversations between employees and managers to ensure employees have individualized career discussions that align both with organizational and employee professional development goals. We also make customized learning pathways available through a global platform where all employees can take courses to grow their skill sets.

To ensure we are building leadership strength and capabilities, we have robust talent assessment discussions where high-performing and high potential employees are identified for future growth opportunities, as well as succession planning for future critical leadership positions.

Diversity, Equity, Inclusion and Belonging

We embrace diversity and inclusion and strive to provide a rich environment with diverse skills, backgrounds and perspectives. We strongly believe diverse teams are more innovative and productive. Our goal is to cultivate an environment that not only allows for, but also encourages, everyone to collaborate and participate equally to foster individual and company

growth. As of June 2024, 20% of global employees, 20% senior executive leadership positions and 38% of our Board of Directors identified as female. To further these objectives in fiscal 2024, we engaged in an internal communications campaign, employee resource group development, measuring our employee’s perceptions on this topic and publishing our diversity, equity, inclusion, and belonging statement and commitment.

Information about our Executive Officers

The following table sets forth certain information regarding our executive officers as of August 16, 2024:

Michael Hurlston has been the President and Chief Executive Officer of our company since August 19, 2019. Prior to joining our company, Mr. Hurlston served as the Chief Executive Officer and a member of the Board of Directors of Finisar Corporation (“Finisar”) from January 2018 to August 2019. Prior to joining Finisar, he served as Senior Vice President and General Manager of the Mobile Connectivity Products/Wireless Communications and Connectivity Division and held senior leadership positions in sales, marketing, and general management at Broadcom Limited (“Broadcom”) and its predecessor corporation from November 2001 through October 2017. Prior to joining Broadcom in 2001, Mr. Hurlston held senior marketing and engineering positions at Oren Semiconductor, Inc., Avasem, Integrated Circuit Systems, Micro Power Systems, Exar and IC Works from 1991 until 2001. Mr. Hurlston is a member of the board of directors and audit committee of Flex Ltd. He is also a member of the board of directors and compensation committee at Astera Labs. Mr. Hurlston serves on the Board of Executive Trustees of the UC Davis Foundation and on the Dean’s Executive Committee for the College of Engineering and the Dean’s Advisory Counsel for the Graduate School of Management at the University of California, Davis. Mr. Hurlston holds Bachelor of Science and Master of Science degrees in Electrical Engineering and a Master of Business Administration degree from the University of California, Davis.

Ken Rizvi has been the Chief Financial Officer of our company since July 15, 2024. Prior to joining our company, Mr. Rizvi served as Senior Vice President and Chief Financial Officer of SMART Global Holdings, Inc., a diversified business focused on providing high-performance, high-availability solutions to enterprise customers, from February 2021 to June 2024. Prior to joining SMART Global Holdings, Mr. Rizvi served as Senior Vice President and Chief Financial Officer of UTAC Holdings Ltd., a global semiconductor assembly and test services provider, from June 2018 until February 2021. He served as Senior Vice President and Chief Financial Officer at Isola Group, a global materials sciences company, from August 2016 to June 2018. Prior to Isola, Mr. Rizvi held senior leadership roles at Micron Technology, Inc., and ON Semiconductor. He has also served as an associate with Technology Crossover Ventures and as an investment banker at Morgan Stanley. Mr. Rizvi holds an Executive Master of Business Administration from the W.P. Carey School of Business at Arizona State University and a Bachelor of Arts in Economics from Yale University.

Lisa Bodensteiner has been Senior Vice President, Chief Legal Officer and Secretary since November 2023. Prior to joining our company, Ms. Bodensteiner was Executive Vice President, Chief Legal Officer, Compliance Officer and Corporate Secretary of Plantronics, Inc. ("Poly") from October 2020 to October 2022. Ms. Bodensteiner served as a Principal of MDAC, LLC, a family-owned real estate company, from June 2016 to October 2020, and Executive Vice President, General Counsel and Chief Compliance Officer at SunPower Corporation, a global energy company and provider of solar power solutions, from June 2012 to May 2016. Before joining SunPower, Ms. Bodensteiner held key executive roles at First Solar, Inc. from April 2009 to June 2012 and OptiSolar Inc., where she was also on the leadership team, from October 2007 to April 2009. She also served as Executive Vice President, General Counsel, Secretary and Chief Compliance Officer at Calpine Corporation from February 1996 to April 2006. Ms. Bodensteiner holds a Juris Doctor degree from Santa Clara University School of Law and a Bachelor of Science in Business Administration in Accounting from the University of Nevada

Vikram Gupta has been the Senior Vice President and General Manager of IoT Processors and Chief Product Officer since January 2023. Prior to joining Synaptics, Mr. Gupta was the SVP and GM of IoT Compute and Wireless Business Lines for Infineon Technologies, a manufacturer of semiconductor solutions, from April 2020 to November 2022, where he led the integration and transformation efforts for the $1B+ multi-site business with three product lines following Infineon’s acquisition of Cypress Semiconductor, where he served as VP of Engineering of the IoT Business Unit from 2016 to 2019 and SVP and

GM of the IoT Business Unit from 2019 to 2020. Prior to Cypress Semiconductor, Mr. Gupta navigated a progressive tenure with Broadcom, advancing in leadership and responsibility across both engineering and business. Earlier in his career he was a co-founder of Zeevo, a developer of SOC solutions for Bluetooth and other wireless communications applications, which was ultimately purchased by Broadcom. He holds a Bachelor’s degree in Electrical and Electronics Engineering from Birla Institute of Technology & Science in India and a Master’s Degree in Electrical Engineering from the University of Hawaii at Manoa.

Satish Ganesan has been the Senior Vice President and General Manager of Intelligent Sensing Division since February 2024. Mr. Ganesan joined Synaptics in November 2019 as our Chief Strategy Officer. Prior to joining our Company, Mr. Ganesan served as Chief Product Officer of Keyssa Inc., a wireless startup focused on short range connectivity, from May 2017 to October 2018. Before that, he held several executive positions focused on IoT and mobile strategy and product marketing at Broadcom Limited from August 2007 to November 2010 and January 2014 to February 2016. He also served as Director, Product Management & Product Marketing at Tilera Corporation from December 2011 to December 2013. He spent his early career in various engineering roles at Xilinx, and holds more than 10 US patents. Mr. Ganesan received his Bachelor of Science in Electrical and Electronics Engineering from BITS, India and his Master of Science in Computer Engineering from the University of Cincinnati

ITEM 1A. RISK FACTORS

Investing in our securities involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this report, including under the headings “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business” and the consolidated financial statements and the related notes included elsewhere in this report, before making an investment decision. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that materially and adversely affect our business. If any of the following risks actually occurs, our business operations, financial condition, operating results, and prospects could be materially and adversely affected. The market price of our securities could decline due to the materialization of these or any other risks, and you could lose part or all of your investment.

Summary of Risk Factors

Risks Related to Our Industry and Business

Risks Related to Our Supply Chain

Risks Related to Product Development

Risks Related to International Sales and Operations

Risks Related to Our Employees

Risks Related to Our Intellectual Property

Risks Related to Acquisitions

Risks Factors Related to Our Indebtedness

General Risk Factors

Risks Related to Our Industry and Business

We currently depend on our solutions for the IoT, Enterprise and Automotive and Mobile product applications markets for a substantial portion of our revenue, and any downturn in sales of these products would adversely affect our business, revenue, operating results, and financial condition.

We currently depend on our solutions for the Core IoT, Enterprise and Automotive and Mobile product applications markets for a substantial portion of our revenue. Any downturn in sales of our products into any of these markets would adversely affect our business, revenue, operating results, and financial condition. Similarly, a softening of demand in any of these markets, or a slowdown of growth in any of these markets because of changes in customer preferences, the emergence of

applications not including our solutions, or other factors would cause our business, operating results, and financial position to suffer. Our future revenue growth, if any, will depend in part on our ability to further penetrate into, and expand beyond, these markets. Demand in these markets fluctuates significantly, driven by consumer spending, consumer preferences, the development of new technologies and prevailing economic conditions. We cannot provide any assurance that our customers’ products which incorporate our solutions will be successful and such products may experience price erosion or other competitive factors that affect the price customers are willing to pay us. Each of these markets presents distinct and substantial risks. If any of these markets do not develop as we currently anticipate, or if we are unable to penetrate them successfully, it could materially and adversely affect our revenue and revenue growth rate, if any.

In many of the markets in which we compete, we depend on winning selection processes, and failure to be selected could adversely affect our business in those market segments.

One of our business strategies is to participate in and win competitive bid selection processes to develop products for use in our customers’ products. These selection processes can be lengthy and require us to incur significant design and development expenditures, with no guarantee of winning a contract or generating revenue. Failure to win new design projects and delays in developing new products with anticipated technological advances or in commencing volume shipments of these products may have an adverse effect on our business. This risk is particularly pronounced in markets where there are only a few potential customers and in the Automotive market, where, due to the longer design cycles involved, failure to win a design-in could prevent access to a customer for several years. Our failure to win a sufficient number of these bids could result in reduced revenue and hurt our competitive position in future selection processes because we may not be perceived as being a technology or industry leader, each of which could have a material adverse effect on our business, financial condition and results of operations.

We rely on OEMs and ODMs to design our products into their end products.

Our products are not sold directly to the end user but are components or subsystems of other products. As a result, we rely on OEMs and ODMs to select our products from among alternative offerings to be designed into their equipment. Without these “design wins,” we would have difficulty selling our products. If a customer designs another supplier’s product into one of its product platforms, it is more difficult for us to achieve future design wins with that platform because changing suppliers involves significant cost, time, effort, and risk on the part of that customer. Also, achieving a design win with a customer does not ensure that we will receive revenue from that customer. Even after a design win, the customer is not obligated to purchase our products and can choose at any time to reduce or cease use of our products, for example, if its own products are not commercially successful, or for any other reason. We may not continue to achieve design wins or to convert design wins into actual sales, and failure to do so could materially and adversely affect our operating results. Furthermore, as a result of our lengthy product development and sales cycle, we may incur significant research and development expenses, and selling, general, and administrative expenses, without generating the anticipated revenue associated with these products.

A significant portion of our sales comes from one or more large customers, the loss of which could harm our business, financial condition, and operating results.

Historically, we have relied on a limited number of customers for a substantial portion of our total revenue. If we lost key customers, or if key customers reduced or stopped placing orders for our high-volume products, our financial results could be adversely affected. Sales to one customer accounted for 12% of our net revenue in fiscal 2024. During fiscal 2024, we had one OEM customer that integrated our products into their products representing 11% of our revenue; we sold to these customers primarily indirectly through multiple distributors. Significant reductions in sales to our largest customers, the loss of other major customers, or a general decrease in demand for our products within a short period of time could adversely affect our revenue, financial condition, and business.

We sell to contract manufacturers that serve our OEM customers. Any material delay, cancellation, or reduction of orders from any one or more of these contract manufacturers or the OEMs they serve could harm our business, financial condition, and operating results. The adverse effect could be more substantial if our other customers do not increase their orders or if we are unsuccessful in generating orders for our solutions with new customers. Many of these contract manufacturers sell to the same OEMs, and therefore our concentration with certain OEMs may be higher than with any individual contract manufacturer. Concentration in our customer base may make fluctuations in revenue and earnings more severe and make business planning more difficult. If we are unable to increase the number of large customers in key markets, then our operating results in the foreseeable future would be expected to continue to depend on sales to a relatively small number of customers, as well as the ability of these customers to sell products that incorporate our solutions. In the future, these customers may decide not to purchase our products at all, purchase fewer products than they did in the past, or alter their purchasing patterns in some other way, including, without limitation, because we do not have long-term product purchase commitments from our customers, technological changes could lead to substantial volatility based on product transitions, customers may purchase similar products

from our competitors or develop their own solutions, become subject to severe business disruptions or trade restrictions or tariffs (particularly in jurisdictions such as China).

We face risks related to recessions, inflation, stagflation and other macroeconomic conditions.

Customer demand for our products may be impacted by weak macroeconomic conditions, inflation, stagflation, recessionary or lower-growth environments, rising interest rates, equity market volatility or other negative economic factors in the U.S. or other nations. For example, under these conditions or expectation of such conditions, our customers may cancel orders, delay purchasing decisions or reduce their use of our services. In addition, these economic conditions could result in higher inventory levels and the possibility of resulting excess capacity charges from our manufacturing partners if we need to slow production to reduce inventory levels. Further, in the event of a recession or threat of a recession, our manufacturing partners, suppliers, distributors, and other third-party partners may suffer their own financial and economic challenges, and as a result they may demand pricing accommodations, delay payment, or become insolvent, which could harm our ability to meet our customer demands or collect revenue or otherwise harm our business. Our products are incorporated in numerous consumer devices, and demand for such products is ultimately driven by consumer demand for products such as smartphones, tablets, notebook computers, automobiles and virtual reality products. Many of these purchases are discretionary. Global economic volatility and economic volatility in the specific markets in which the devices that incorporate our products are ultimately sold, including the impacts of high rates of inflation and a potential recession, can cause extreme difficulties for our customers and third-party vendors in accurately forecasting and planning future business activities. If our costs become subject to significant inflationary pressures, we may not be able to fully offset such higher costs with increased revenues. Similarly, disruptions in financial and/or credit markets may impact our ability to manage normal commercial relationships with our manufacturing partners, customers, suppliers and creditors and might prevent us from accessing preferred sources of liquidity and causing our borrowing costs to potentially increase. Thus, if general macroeconomic conditions, conditions in the semiconductor industry, or conditions in our customer end markets continue to deteriorate or experience a sustained period of weakness or slower growth, our business and financial results could be materially and adversely affected.

In addition, we are subject to risk from inflation and increasing market prices of certain components and supplies, which are incorporated into our end products or used by our manufacturing partners or suppliers to manufacture our end products. These components and supplies have, from time-to-time, become restricted. Additionally, general market factors and conditions have in the past, and may in the future, affect pricing of such components and supplies (such as inflation or supply chain constraints). See also, “Our gross margin and results of operations may be adversely affected in the future by a number of factors, including decreases in our average selling prices of products over time, shifts in our product mix, or price increases of certain components or third-party services due to inflation, supply chain constraints, or for other reasons.”

We are exposed to industry downturns and cyclicality in our target markets that may result in fluctuations in our operating results.

The consumer electronics industry has experienced significant economic downturns at various times. These downturns are characterized by diminished product demand, accelerated erosion of average selling prices, production overcapacity, and increased inventory and credit risk. In addition, the consumer electronics industry is cyclical in nature due to constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. We seek to reduce our exposure to industry downturns and cyclicality by providing design and production services for leading companies in rapidly expanding industry segments. We may, however, experience substantial period-to-period fluctuations in future operating results because of general industry conditions or events occurring in the general economy. We cannot predict the timing, strength, or duration of any industry slowdown or economic recovery. If the industry and markets in which we operate deteriorate, our business, financial condition, and results of operations may be materially and adversely affected.

We face intense competition that could result in our losing or failing to gain market share and suffering reduced revenue.

We serve intensely competitive markets that are characterized by price erosion, rapid technological change, and competition from major domestic and international companies. We expect that the market for our products will continually evolve and will be subject to rapid technological change. For example, new products and disruptive technologies are being developed, and companies with which we compete have implemented artificial intelligence strategies for products and service offerings. This rapid pace of technological change can create opportunities for our competitors and harm our competitiveness in the market if our products do not evolve or we are unable to effectively keep up with such changes. This intense competition could result in pricing pressures, lower sales, reduced margins, and lower market share. Depressed economic conditions, a slowdown in the markets in which we operate, the emergence of new products not including our product solutions, rapid changes in the markets in which we operate, and competitive pressures may result in lower demand for our product solutions and reduced unit margins.

Some of our current and potential competitors have greater market recognition, longer operating histories, larger customer bases, and substantially greater financial, technical, marketing, distribution, and other resources than we possess and that afford them greater competitive advantages. As a result, they may be able to devote greater resources to the promotion and sale of products, negotiate lower prices for raw materials and components, deliver competitive products at lower prices, and introduce new product solutions and respond to customer requirements more quickly than we can. Our competitive position could suffer if one or more of our customers determine not to utilize our custom engineered, total solutions approach and instead, decide to design and manufacture their own interfaces, contract with our competitors, or use alternative technologies. Our competitors may also offer bundled solutions offering a more complete solution despite the technical merits or advantages of our products. We also face increased competition as a result of China actively promoting its domestic semiconductor industry through policy changes and investment. These actions, as well as China-U.S. trade barriers, may restrict our participation in the China market or may prevent us from competing effectively with Chinese companies or companies from other countries that China favors over the United States. Competition could decrease our prices, reduce our sales, adversely affect our gross margins and/or decrease our market share.

We cannot assure you that our product solutions for new markets will be successful or that we will be able to continue to generate significant revenue from these markets.

Our product solutions may not be successful in new markets. Various target markets for our product solutions, such as Core IoT, may develop slower than anticipated or could utilize competing technologies. The markets for certain of these products depend in part upon the continued development and deployment of wireless and other technologies, which may or may not address the needs of the users of these products.

Our ability to generate significant revenue from new markets will depend on various factors, including the following:

Many manufacturers of these products have well-established relationships with competitive suppliers. Our ongoing success in these markets will require us to offer better performance alternatives to other solutions at competitive costs. The failure of any of these target markets to develop as we expect, or our failure to serve these markets to a significant extent or in a timely manner, will impede our sales growth and could result in substantially reduced earnings and a restructuring of our operations. For example, the growth of the Core IoT market is dependent on the adoption of industry standards to permit devices to connect and communicate with each other. If the industry cannot agree on a common set of standards, then the growth of the Core IoT market may be slower than expected. Unfavorable developments with evolving laws and regulations worldwide related to these products and suppliers, including with respect to artificial intelligence, may limit global adoption, impede our strategy, and negatively impact our long-term expectations in this area. Many of these products are still emerging and demand for these products may be unpredictable and may vary significantly from one period to another. We cannot predict the size or growth rate of these markets or the market share we will achieve or maintain in these markets in the future.

If we fail to maintain and build relationships with our customers, or our customers’ products that utilize our solutions do not gain widespread market acceptance, our revenue may stagnate or decline.

We do not sell any products to end users and we do not control or influence the manufacture, promotion, distribution, or pricing of the products that incorporate our solutions. Instead, we design various solutions that our OEM customers incorporate into their products, and we depend on such OEM customers to successfully manufacture and distribute products incorporating our solutions and to generate consumer demand through marketing and promotional activities. As a result of this, our success depends almost entirely upon the widespread market acceptance of our OEM customers’ products that incorporate our solutions. Even if our technologies successfully meet our customers' price and performance goals, our sales could decline or fail to develop if our customers do not achieve commercial success in selling their products that incorporate our solutions.

We must maintain our relationships with our existing customers and expand our relationships with OEMs in new markets. Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead to issue purchase orders that they can cancel, reduce, or delay, subject to certain limitations. In order to meet the expectations of our customers, we must provide innovative solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, maintain satisfactory delivery schedules, and meet performance goals. If we are unable to achieve these goals for any reason, our sales may decline or fail to develop, which would result in decreasing revenue. If

customers do not purchase products made specifically for them, we may be unable to resell such products to other customers or may be unable to require the customers who have ordered these products to pay a cancellation fee. Moreover, it is possible that our customers may develop their own products or adopt a competitor’s solution for products that they currently buy from us. When this occurs, our sales could decline and/or our market share could be reduced.

In addition to maintaining and expanding our customer relationships, we must also identify areas of significant growth potential in other markets, establish relationships with OEMs in those markets, and assist those OEMs in developing products that incorporate our solutions. Our failure to identify potential growth opportunities in the markets in which we operate, particularly in the Core IoT market, or our failure to establish and maintain relationships with OEMs in those markets, would prevent our business from growing in those markets.

Our gross margin and results of operations may be adversely affected in the future by a number of factors, including decreases in our average selling prices of products over time, shifts in our product mix, or price increases of certain components or third-party services due to inflation, supply chain constraints, or other reasons.

We expect that the average unit selling prices of our products will continue to be subject to significant pricing pressures. In addition, our more recently introduced products tend to have higher associated costs because of initial overall development and production expenses. Therefore, over time, we may not be able to maintain or improve our gross margins. Our financial results could suffer if we are unable to offset any reductions in our average selling prices by other cost reductions through efficiencies, introduction of higher margin products and other means.

To attract new customers or retain existing customers, we may offer certain price concessions to certain customers, which could cause our average selling prices and gross margins to decline. In the past, we have reduced the average selling prices of our products in anticipation of future competitive pricing pressures, new product introductions by us or by our competitors and other factors. We expect to continue to have to reduce prices of existing products in the future. Moreover, because of the wide price differences across the markets we serve, the mix and types of performance capabilities of our products sold may affect the average selling prices of our products and have a substantial impact on our revenue and gross margin. We may enter new markets in which a significant amount of competition exists, and this may require us to sell our products with lower gross margins than we earn in our established businesses. If we are successful in growing revenue in these markets, our overall gross margin may decline. Fluctuations in the mix and types of our products may also affect the extent to which we are able to recover the fixed costs and investments associated with a particular product, and as a result may harm our financial results.

Additionally, because we do not operate our own manufacturing, assembly, testing or packaging facilities, we are not able to reduce our costs as rapidly as companies that operate their own facilities and our costs may even increase, which could also reduce our gross margins. Our gross margin could also be impacted, for example, by the following factors: increased costs (including increased costs caused by tariffs, inflation, higher interest rates, or supply chain constraints); loss of cost savings if parts ordering does not correctly anticipate product demand or if the financial health of either our manufacturing partners or our suppliers deteriorates; excess inventory, or inventory holding and obsolescence charges. In addition, we are subject to risks from fluctuating market prices of certain components, which are incorporated into our products or used by our suppliers to manufacture our products. Supplies of these components may from time-to-time become restricted, or general market factors and conditions such as inflation or supply chain constraints have in the past affected and may in the future affect pricing of such commodities. Any increase in the price of components used in our products will adversely affect our gross margins.

We are subject to order and shipment uncertainties. If we are unable to accurately predict customer demand, we may hold excess or obsolete inventory, which would reduce our gross margin. Conversely, we may have insufficient inventory or be unable to obtain the supplies or contract manufacturing capacity to meet that demand, which would result in lost revenue opportunities and potential loss of market share as well as damaged customer relationships.

We typically sell products pursuant to purchase orders rather than long-term purchase commitments. Some of our customers have, and others may in the future, cancel or defer purchase orders on short notice without incurring a significant penalty. In addition, customers who have purchase commitments may not honor those commitments. Due to their inability to predict demand or other reasons during our fiscal 2024, some of our customers have accumulated excess inventories and, as a consequence, they either have deferred or they may defer future purchases of our products. We cannot accurately predict what or how many products our customers will need in the future. Anticipating demand is difficult because our customers face unpredictable demand for their own products and are increasingly focused more on cash preservation and tighter inventory management.

We place orders with our suppliers based on forecasts of customer demand and, in some instances, may establish buffer inventories to accommodate anticipated demand. Our forecasts are based on multiple assumptions, each of which may introduce error into our estimates. For example, our ability to accurately forecast customer demand may be impaired by the delays inherent in our customer’s product development processes, which may include extensive qualification and testing of components included in their products, including ours. In many cases, they design their products to use components from multiple suppliers. This creates the risk that our customers may decide to cancel or change product plans for products incorporating our semiconductor solutions prior to completion, which makes it even more difficult to forecast customer demand. In addition, while many of our customers are subject to purchase orders or other agreements that do not allow for cancellation, there can be no assurance that these customers will honor these contract terms and cancellation of these orders may adversely affect our business operations and demand forecast which is the basis for us to have products made.

Our products are incorporated into complex devices and systems, which creates supply chain cross-dependencies. Due to cross dependencies, supply chain disruptions have in the past, and may in the future, negatively impact the demand for our products. We have a limited ability to predict the timing of a supply chain correction. If we cannot predict future customer demand or supply chain disruptions, then we may hold excess or obsolete inventory. Moreover, significant supply chain disruption may negatively impact the timing of our product shipments and revenue shipment linearity, which may impact and extend our cash conversion cycle. In addition, the market share of our customers could be adversely impacted on a long-term basis due to any continued supply chain disruption, which could negatively affect our results of operations.

If we overestimate customer demand, our excess or obsolete inventory may increase significantly, which would reduce our gross margin and adversely affect our financial results. The risk of obsolescence and/or excess inventory is heightened for semiconductor solutions due to the rapidly changing market for these types of products. Conversely, if we underestimate customer demand or if insufficient manufacturing capacity is available, we would miss revenue opportunities and potentially lose market share and damage our customer relationships. In addition, any future significant cancellations or deferrals of product orders, or the return of previously sold products, could materially and adversely affect our profit margins, increase product obsolescence and restrict our ability to fund our operations.

If we fail to manage our growth effectively, our infrastructure, management, and resources could be strained, our ability to effectively manage our business could be diminished, and our operating results could suffer.

The failure to manage our planned growth effectively could strain our resources, which would impede our ability to increase revenue. We have increased the number of our solutions in the past and may plan to further expand the number and diversity of our solutions and their use in the future. Our ability to manage our planned diversification and growth effectively will require us to:

In connection with the expansion and diversification of our product and customer base, we may increase our personnel and make other expenditures to meet demand for our expanding product offerings, including offerings in the Core IoT market, the Enterprise and Automotive applications market, and the Mobile product applications market. Any increase in expenses or investments in infrastructure and facilities in anticipation of future orders that do not materialize would adversely affect our profitability. Our customers also may require rapid increases in design and production services that place an excessive short-term burden on our resources and the resources of our contract manufacturers. An inability to quickly expand our development, design or production capacity or an inability of our third-party manufacturers to quickly expand development, design, or production capacity to meet this customer demand could result in a decrease to our revenue or operating results. If we cannot manage our growth effectively, our business and operating results could suffer.

Risks Related to Our Supply Chain

We depend on third parties to maintain satisfactory manufacturing yields and delivery schedules, and their inability to do so could increase our costs, disrupt our supply chain, and result in our inability to deliver our products, which would adversely affect our operating results.

We depend on our contract manufacturers and semiconductor fabricators to maintain high levels of productivity and satisfactory delivery schedules at manufacturing and assembly facilities located primarily in Asia. We provide our contract

manufacturers with six-month rolling forecasts of our production requirements. We generally do not, however, have long-term agreements with our contract manufacturers that guarantee production capacity, prices, lead times, or delivery schedules. If end customer demand declines, these long-term capacity agreements could result in significant write-downs of inventory. On occasion, customers require rapid increases in production, which can strain our resources and reduce our margins. Although we have been able to obtain increased production capacity from our third-party contract manufacturers in the past, there is no guarantee that our contract manufacturers will be able to increase production capacity to enable us to meet our customer demands in the future. Our contract manufacturers also serve other customers, a number of which have greater production requirements than we do. As a result, our contract manufacturers could determine to prioritize production capacity for other customers or reduce or eliminate deliveries to us on short notice.

Qualifying new contract manufacturers, and specifically semiconductor foundries, is time consuming and might result in unforeseen manufacturing and operations problems. We may also encounter lower manufacturing yields and longer delivery schedules in commencing volume production of new products that we introduce, which could increase our costs or disrupt our supply of such products. In addition, a foundry or supplier may become unavailable to us as a result of economic or political instability. The loss of relationships with our contract manufacturers or assemblers, or their inability to conduct their manufacturing and assembly services for us as anticipated in terms of capacity, cost, quality, and timeliness could adversely affect our ability to fill customer orders in accordance with required delivery, quality, and performance requirements, and adversely affect our operating results.

Shortages of components and materials may delay or reduce our sales and increase our costs, thereby harming our operating results.

The inability to obtain sufficient quantities of components and other materials necessary for the production of our products could result in reduced or delayed sales or lost orders. Many of the materials used in the production of our products are available only from a limited number of foreign suppliers, particularly suppliers located in Asia. In most cases, neither we nor our contract manufacturers have long-term supply contracts with these suppliers. Additionally, it is possible that their customers that are larger and better financed than we are or that have long-term agreements with our main foundries may induce them to reallocate capacity to those customers. As a result, we are subject to increased costs, supply interruptions, and difficulties in obtaining materials. Our customers also may encounter difficulties or increased costs in obtaining the materials necessary to produce their products into which our product solutions are incorporated. Future shortages of materials and components, including potential supply constraints of silicon, could cause delayed shipments and customer dissatisfaction, which may result in lower revenue.

Risks Related to Product Development

We are subject to lengthy development periods and product acceptance cycles, which can result in development and engineering costs without any future revenue.

We provide solutions that are incorporated by OEMs into the products they sell. OEMs make the determination during their product development programs whether to incorporate our solutions or pursue other alternatives. This process requires us to make significant investments of time and resources in the design of solutions for our OEMs’ products well before our customers introduce their products incorporating our interface solutions into the market, and before we can be sure that we will generate any significant sales to our customers or even recover our investment. During a customer’s entire product development process, we face the risk that our interfaces will fail to meet our customer’s technical, performance, or cost requirements, or that our products will be replaced by competitive products or alternative technological solutions. Even if we complete our design process in a manner satisfactory to our customer, the customer may delay or terminate its product development efforts. The occurrence of any of these events could cause sales to not materialize, be deferred, or be cancelled, which could adversely affect our operating results.

Failures in our solutions, or in our customers’ products, including resulting from security vulnerabilities, defects or errors, could harm our business.

Our solutions are complex and may contain defects, errors or security vulnerabilities, or experience failures or unsatisfactory performance, due to any number of issues, including issues in materials, design, fabrication, packaging and/or use within a system. Development of solutions in new domains of technology, and the migration to integrated circuit technologies with smaller geometric feature sizes, increases complexity and adds risk to manufacturing yields and reliability, and increases the likelihood of product defects, errors or security vulnerabilities. Defects, errors, security vulnerabilities or other unintended functionality could also be introduced into our solutions by cyber-attacks or other actions by malicious actors, either directly or through third-party products or software or open source code used in our solutions.

Risks associated with product or technology defects, errors or security vulnerabilities are exacerbated by the fact that our customers in many instances integrate our solutions into consumer and other devices. Our solutions are used in applications

that gather and process large amounts of data, such for IoT, Enterprise and Automotive and Mobile product applications. The use of products containing our solutions to interact with untrusted systems or otherwise access untrusted content creates a risk of exposing the system hardware and software in those products to malicious attacks. Further, security vulnerabilities in our solutions could expose our customers, or end users of our customers’ products, to hackers or other unscrupulous third parties who develop and deploy malware that could attack our solutions or our customers’ products or IT infrastructure. Such attacks could result in the disruption of our customers’ businesses or the misappropriation, theft, misuse, disclosure, loss or destruction of the technology or intellectual property, or the proprietary, confidential or personal information, of our customers, their employees or the end users of our customers’ products. Security features in our solutions cannot make our solutions entirely secure. Mitigation techniques designed to address security vulnerabilities, including software and firmware updates or other preventative measures, are not always available on a timely basis, or at all, and at times do not operate as intended or effectively resolve vulnerabilities for all applications. While we continue to focus on this issue and take measures to safeguard our products from cybersecurity threats, device capabilities continue to evolve, enabling more elaborate functionality and applications, and increasing the risk of security failures, and techniques used to perpetrate cybersecurity attacks are increasingly sophisticated and constantly evolving.

Such defects, errors or security vulnerabilities could give rise to significant costs, including costs related to developing solutions, recalling products, repairing or replacing defective products, writing down defective inventory or indemnification obligations under our agreements, and could result in the loss of sales and divert the attention of our personnel from our product development efforts. In addition, defects, errors or security vulnerabilities in our products could result in failure to achieve market acceptance, a loss of design wins, a shifting of business to our competitors, product liability claims and litigation or regulatory action against us, and could harm our reputation, our relationships with customers and our ability to attract new customers, as well as the perceptions of our brand. Further, our business liability insurance may be inadequate, may not cover the claims, and future coverage may be unavailable on acceptable terms, which could adversely impact our financial results.

Our use of open source software in certain products and services could materially adversely affect our business, financial condition, operating results and cash flow.

Many of our products and services incorporate open source software, the use of which may subject us to certain conditions, including the obligation to offer such products for no cost or to make the proprietary source code of those products publicly available. Open source licenses are generally “as-is” and do not provide warranties, support or assurance of title or controls on origin of the software, which exposes us to potential liability if the software fails to work or infringes the intellectual property of a third-party.

Although we monitor our use of open source software to avoid subjecting our products to unintended conditions and exposing us to significant financial risk, such use, under certain circumstances, could adversely affect our business, financial condition and operating results and cash flow, including if we are required to take remedial action that may divert resources away from our development efforts. In addition, we may receive inquiries or claims from authors, distributors or recipients of open source software included in our products regarding our compliance with the conditions of such open source licenses and we may be required to take steps to avoid or remedy an alleged infringement or noncompliance, including modifying our product code, stopping the distribution of some of our products, paying damages or releasing the source code of our propriety software.

If we do not keep pace with technological innovations, our products may not remain competitive and our revenue and operating results may suffer.

We operate in rapidly changing, highly competitive markets. Technological advances, including advances in artificial intelligence, the introduction of new products and new design techniques could adversely affect our business unless we are able to adapt to changing conditions. Technological advances could render our solutions less competitive or obsolete, and we may not be able to respond effectively to the technological requirements of evolving markets. Therefore, we may be required to expend substantial funds for and commit significant resources to enhancing and developing new technology, which may include purchasing advanced design tools and test equipment, hiring additional highly qualified engineering and other technical personnel, and continuing and expanding research and development activities on existing and potential solutions.

Our research and development efforts with respect to new technologies may not result in customer or market acceptance. Some or all of those technologies may not successfully make the transition from the research and development stage to cost-effective production as a result of technology problems, competitive cost issues, yield problems, and other factors. Even if we successfully complete a research and development effort with respect to a particular technology, our customers may decide not to introduce or may terminate products utilizing the technology for a variety of reasons, including difficulties with other suppliers of components for the products, superior technologies developed by our competitors and unfavorable comparisons of our solutions with these technologies, price considerations and lack of anticipated or actual market demand for the products.

Our business could be harmed if we are unable to develop and utilize new technologies that address the needs of our customers, or our competitors or customers develop and utilize new technologies more effectively or more quickly than we can. Any investments made to enhance or develop new technologies that are not successful could have an adverse effect on our net revenue and operating results.

Conditions in Israel may materially and adversely affect our business.

We have employees and facilities located in Israel. As a result, political, economic and military conditions in Israel may directly affect our business. In October 2023, Hamas conducted several terrorist attacks in Israel resulting in the Israel-Hamas war, forcing the closure of our offices in Israel for several days. Recent conflicts between Iran and Israel may escalate into a wider Middle East crisis, further impacting regional stability. Any armed conflicts, terrorist activities or political instability involving Israel or other countries in the region could adversely affect our business, results of operations, financial condition, cash flows and prospects. Although the Israeli Government currently covers the reinstatement value of direct damages that are caused by terrorist attacks or acts of war, we cannot ensure stockholders that this coverage will be maintained or will be adequate in the event we submit a claim.

Our operations could also be disrupted by the absence for significant periods of one or more key employees or a significant number of other employees because of military service. Some of our employees in Israel are obliged to perform military reserve duty, and in certain emergency circumstances, employees may be called to immediate and unlimited active duty. In October 2023, a number of our employees in Israel were activated for military duty, and although they have returned full-time to the office, some or all of them may be re-activated if the Israel-Hamas war continues. While we have business continuity plans in place to address the safety of our employees and to continue product development in the event of reduced employee availability in the region during the war, any of the foregoing circumstances could have a material adverse effect on our business, results of operations, financial condition, cash flows and prospects.

If we become subject to product returns or claims resulting from defects in our products, we may incur significant costs resulting in a decrease in revenue.

We develop complex products in an evolving marketplace and generally warrant our products for a period of 12 months from the date of delivery. Despite testing by us and our customers, defects may be found in existing or new products. We handle product quality matters sustainably by working on a one-on-one basis with our customers. We have never formally recalled a product or had a mass defect that affected an entire product line. Nevertheless, manufacturing errors or product defects could result in a delay in recognition or loss of revenue, loss of market share, or failure to achieve market acceptance. Additionally, defects could result in financial or other damages to our customers, causing us to incur significant warranty, support, and repair costs, and diverting the attention of our engineering personnel from key product development efforts.

We must finance the growth of our business and the development of new products, which could have an adverse effect on our operating results.

To remain competitive, we must continue to make significant investments in research and development, marketing, and business development. Our failure to sufficiently increase our net revenue to offset these increased costs would adversely affect our operating results.

From time-to-time, we may seek additional equity or debt financing to provide for funds required to expand our business, including through acquisitions. We cannot predict the timing or amount of any such requirements at this time. If such financing is not available to us on satisfactory terms, we may be unable to expand our business or to develop new business at the rate desired and our operating results may suffer. If obtained, the financing itself carries risks including the following: (i) debt financing increases expenses and must be repaid regardless of operating results; and (ii) equity financing, including the issuance of convertible notes or additional shares in connection with acquisitions, could result in dilution to existing stockholders and could adversely affect the price of our common stock.

Risks Related to International Sales and Operations

Changes to import, export and economic sanction laws may expose us to liability, increase our costs and adversely affect our operating results.

As a global company headquartered in the U.S., we are subject to U.S. laws and regulations, including import, export, and economic sanction laws. These laws may include prohibitions on the sale or supply of certain products to embargoed or sanctioned countries, regions, governments, persons, and entities, may require an export license prior to the export of the controlled item, or may otherwise limit and restrict the export of certain products and technologies. Many of our customers, suppliers and contract manufacturers are foreign companies or have significant foreign operations. The imposition of new or additional economic and trade sanctions against our major customers, suppliers or contract manufacturers could result in our inability to sell to, and generate revenue from such customer, supplier, or contract manufacturer. As a result of restrictive export laws, our customers may also develop their own solutions to replace our products or seek to obtain a greater supply of similar or substitute products from our competitors that are not subject to these restrictions, which could material and adversely affect our business and operating results.

Additionally, the U.S. has published significant changes to U.S. export control regulations with respect to Russia and China, and additional changes to export control regulations are expected in the future. For example, the U.S. government has implemented controls on transactions involving items for semiconductor manufacturing end-users, and the new controls expand the scope of foreign-produced items subject to license requirements for certain entities on the U.S. government’s Entity List. Future changes in the U.S. export control regulations, including changes in the enforcement and scope of such regulations, could prevent the export or import of our products to these entities, which could have a material impact on our future results of operations and financial condition.

In addition, compliance with additional export regulations may result in increased costs to the company. Although we have an export compliance program, maintaining and adapting our export controls program to new and shifting regulations is expensive, time-consuming and requires significant management attention. Failure to comply with trade or economic sanctions could subject the company to legal liabilities and fines from the U.S. government. We must also comply with export restrictions and laws imposed by other countries affecting trade and investments. Although these restrictions and laws have not materially restricted our operations in the recent past, there is a significant risk that they could do so in the future, which would materially and adversely affect our business and operating results.

Changes to international trade policy and rising concerns of international tariffs, including tariffs applied to goods traded between the U.S. and China, could materially and adversely affect our business and results of operations.

Many of the materials used in the production of our products are available only from a limited number of foreign suppliers, particularly suppliers located in Asia. The imposition of tariffs against foreign imports of certain materials could make it more difficult or expensive for us or our OEMs to obtain sufficient quantities of components and other materials necessary for the production of our products or products which incorporate our product solutions. Any interruptions to supply could result in delay or cancellation of our products, which could adversely affect our business and operating results.

Our business and operating results are substantially dependent on international trade. Many of our customers sell products incorporating our solutions into international markets. Tariffs on our customers’ products may adversely affect our gross margins in the future due to the potential for increased pressure on our selling prices by customers seeking to offset the impact of tariffs on their own products. In addition, tariffs could make our OEM customers’ products less attractive relative to products offered by their competitors, which may not be subject to similar tariffs. Some OEMs in our industry have already implemented short-term price adjustments to offset such tariffs and transitioned their production and supply chain to locations outside of China. Furthermore, compliance with export controls and implementation of additional tariffs may increase compliance costs and adversely affect our business and results of operations.

In addition, the institution of trade tariffs both globally and between the U.S. and China carry the risk that China’s overall economic condition may be negatively affected, which could affect our China operations, including the manufacturing operations on which we rely in China. Further, imposition of tariffs could cause a decrease in the sales of our products to customers located in China or to our OEMs selling to customers in China, which could impact our business, revenue, and operating results.

International sales and manufacturing risks could adversely affect our operating results.

Our manufacturing and assembly operations are primarily conducted in Taiwan, China, and Korea by contract manufacturers and semiconductor fabricators. Because of the geographic concentration of some of these suppliers, we are exposed to the risk that their operations may be disrupted by regional events. We have sales and logistics operations in Hong Kong, and sales and engineering design support operations in China, France, Germany, India, Israel, Japan, Korea, Poland, Switzerland, Taiwan, and the U.K. These international operations expose us to various economic, political, regulatory, and other risks that could adversely affect our operations and operating results, including the following:

If any of these risks associated with international operations materialize, our operations could significantly increase in cost or be disrupted, which would negatively affect our revenue and operating results. In addition, while we do not expect the Russian invasion of Ukraine to have a direct material impact on us, we are unable to predict the indirect impact this conflict will have on us due to future impacts on the supply chain, global and domestic economies, interest rates and stock markets.

Our operating results could be adversely affected by fluctuations in the value of the U.S. dollar against foreign currencies.

We transact business predominantly in U.S. dollars, and we invoice and collect our sales in U.S. dollars. A weakening of the U.S. dollar could cause our overseas vendors to require renegotiation of either the prices or currency we pay for their goods and services. In the future, customers may negotiate pricing and make payments in non-U.S. currencies. For fiscal 2024, approximately 17% of our costs were denominated in non-U.S. currencies, including British pounds, Canadian dollars, European Union euro, Hong Kong dollars, Indian rupee, New Taiwan dollars, Japanese yen, Korean won, Chinese yuan, Polish zloty, Israeli New Shekel, and Swiss francs. If our overseas vendors or customers require us to transact business in non-U.S. currencies, fluctuations in foreign currency exchange rates could affect our cost of goods, operating expenses, and operating margins, and could result in exchange losses. In addition, currency devaluation could result in a loss to us if we hold deposits of that currency. Hedging foreign currencies can be difficult, especially if the currency is not freely traded. We cannot predict the impact of future exchange rate fluctuations on our operating results.

Risks Related to Our Employees

We depend on key personnel who would be difficult to replace, and our business will likely be harmed if we lose their services or cannot hire additional qualified personnel.

Our success depends substantially on the efforts and abilities of our senior management and other key personnel. The competition for qualified management and key personnel, especially engineers, is intense. We expect competition for

individuals with our required skill sets, particularly technical and engineering skills, to remain intense even in weak global macroeconomic environments. Although we maintain nondisclosure covenants with most of our key personnel, and our key executives have change of control severance agreements, we do not have employment agreements with many of them. The loss of services of one or more of our key employees or the inability to hire, train, and retain key personnel, especially engineers and technical support personnel, and capable sales and customer-support employees outside the U.S., could delay the development and sale of our products, disrupt our business, and interfere with our ability to execute our business plan.

If we are unable to obtain stockholder approval of share-based compensation award programs or additional shares for such programs, we could be at a competitive disadvantage in the marketplace for qualified personnel or may be required to increase the cash element of our compensation program.

Competition for qualified personnel in our industry is extremely intense, particularly for engineering and other technical personnel. Our compensation program, which includes cash and share-based compensation award components, has been instrumental in attracting, hiring, motivating, and retaining qualified personnel. Our success depends on our continued ability to use our share-based compensation programs to effectively compete for engineering and other technical personnel and professional talent without significantly increasing cash compensation costs. In the future, if we are unable to obtain stockholder approval of our share-based compensation programs or additional shares for such programs, we could be at a competitive disadvantage in the marketplace for qualified personnel or we may be required to increase the cash elements of our compensation program to account for this disadvantage.

Risks Related to Our Intellectual Property

Our ability to compete successfully and continue growing as a company depends on our ability to adequately protect our proprietary technology and confidential information.

We protect our proprietary technology and confidential information through the use of patents, trade secrets, trademarks, copyrights, confidentiality agreements and other contractual provisions. The process of seeking patent protection is lengthy and expensive. Further, there can be no assurance that even if a patent is issued, that it will not be challenged, invalidated, or circumvented, or that the rights granted under the patents will provide us with meaningful protection or any commercial advantage. Failure to obtain trademark registrations could compromise our ability to fully protect our trademarks and brands and could increase the risk of challenge from third parties to our use of our trademarks and brands. Effective intellectual property protection may be unavailable or limited in some foreign countries in which we operate. In particular, the validity, enforceability and scope of protection of intellectual property in China, where we derive a significant portion of our net sales, and certain other countries where we derive net sales, are still evolving and historically, have not protected and may not protect in the future, intellectual property rights to the same extent as laws developed in the U.S.

We do not consistently rely on written agreements with our customers, suppliers, manufacturers, and other recipients of our technologies and products and therefore, some trade secret protection may be lost and our ability to enforce our intellectual property rights may be limited. Confidentiality and non-disclosure agreements that are in place may not be adequate to protect our proprietary technologies or may be breached by other parties. Additionally, our customers, suppliers, manufacturers, and other recipients of our technologies and products may seek to use our technologies and products without appropriate limitations. In the past, we did not consistently require our employees and consultants to enter into confidentiality, employment, or proprietary information and invention assignment agreements. Therefore, our former employees and consultants may try to claim some ownership interest in our technologies and products or may use our technologies and products competitively and without appropriate limitations. Unauthorized parties may attempt to copy or otherwise use aspects of our technologies and products that we regard as proprietary. Additionally, our proprietary information and technologies may be inadvertently leaked through our use of generative and other third party AI tools. Other companies, including our competitors, may independently develop technologies that are similar or superior to our technologies, duplicate our technologies, or design around our patents. If our intellectual property protection is insufficient to protect our intellectual property rights, we could face increased competition in the markets for our technologies and products.

We may pursue, and from time-to-time defend, litigation to enforce our intellectual property rights, to protect our trade secrets, and to determine the validity and scope of the proprietary rights of others. Litigation whether successful or unsuccessful, could result in substantial costs and diversion of resources, which could have a material adverse effect on our business, financial condition, and operating results.

Any claims that our technologies infringe the intellectual property rights of third parties could result in significant costs and have a material adverse effect on our business.

We cannot be certain that our technologies and products do not and will not infringe issued patents or other third-party proprietary rights. Any claims, with or without merit, could result in significant litigation costs and diversion of resources, including the attention of management, and could require us to enter into royalty or licensing agreements, any of which could have a material adverse effect on our business. There can be no assurance that such licenses could be obtained on commercially reasonable terms, if at all, or that the terms of any offered licenses would be acceptable to us. We may also have to pay substantial damages to third parties or indemnify customers or licensees for damages they suffer if the products they purchase from us or the technology they license from us violates any third-party intellectual property rights. An adverse determination in a judicial or administrative proceeding, or a failure to obtain necessary licenses to use such third-party technology could prevent us from manufacturing, using, or selling certain of our products, and there is no guarantee that we will be able to develop or acquire alternate non-infringing technology.

In addition, we license certain technology used in and for our products from third parties. These third-party licenses are granted with restrictions, and there can be no assurances that such third-party technology will remain available to us on commercially acceptable terms. Any breach or violation of the terms and conditions specified in these license agreements could have significant adverse consequences on our operations and financial performance and may result in legal action, monetary penalties, or the termination of the license, which would impact our ability to offer certain products or services.

If third-party technology currently utilized in our products is no longer available to us on commercially acceptable terms, or if any third-party initiates litigation against us for alleged infringement of their proprietary rights, we may not be able to sell certain of our products and we could incur significant costs in defending against litigation or attempting to develop or acquire alternate non-infringing products, which would have an adverse effect on our operating results.

Risks Related to Acquisitions

Any acquisitions that we undertake could be difficult to integrate, disrupt our business, dilute stockholder value, and harm our operating results.

We expect to continue to pursue opportunities to acquire other businesses and technologies in order to complement our current solutions, expand the breadth of our markets, enhance our technical capabilities, or otherwise create growth opportunities. We cannot accurately predict the timing, size, and success of any currently planned or future acquisitions. We may be unable to identify suitable acquisition candidates or to complete the acquisitions of candidates that we identify. Increased competition for acquisition candidates or increased asking prices by acquisition candidates may increase purchase prices for acquisitions to levels beyond our financial capability or to levels that would not result in the returns required by our acquisition criteria. In addition, acquisitions could be difficult to complete as result of increased antitrust scrutiny and regulatory approvals required in the United States and other jurisdictions. Acquisitions may also become more difficult in the future as we or others acquire the most attractive candidates. Unforeseen expenses, difficulties, and delays frequently encountered in connection with rapid expansion through acquisitions could inhibit our growth and negatively impact our operating results. If we make any future acquisitions, we could issue stock that would dilute existing stockholders' percentage ownership, incur substantial debt, assume contingent liabilities, or experience higher operating expenses.

We may be unable to effectively complete an integration of the management, operations, facilities, and accounting and information systems of acquired businesses with our own; efficiently manage, combine or restructure the operations of the acquired businesses with our operations; achieve our operating, growth, and performance goals for acquired businesses; achieve additional revenue as a result of our expanded operations; or achieve operating efficiencies or otherwise realize cost savings as a result of anticipated acquisition synergies. The integration of acquired businesses involves numerous risks, including the following:

We cannot assure you that we would be successful in overcoming problems encountered in connection with any acquisitions, and our inability to do so could disrupt our operations, result in goodwill or intangible asset impairment charges, and adversely affect our business.

Potential strategic alliances may not achieve their objectives, and the failure to do so could impede our growth.

We have entered, and we anticipate that we will continue to enter, into strategic alliances. We continually explore strategic alliances designed to enhance or complement our technology or to work in conjunction with our technology; to provide necessary know-how, components, or supplies; and to develop, introduce, and distribute products utilizing our technology. We may also make investments in other businesses to complement our existing product offerings, augment our market coverage or enhance our personnel or technological capabilities. Certain strategic alliances may not achieve their intended objectives, and parties to our strategic alliances may not perform as contemplated. The failure of these alliances to achieve their objectives may impede our ability to introduce new products and enter new markets.

We may incur material environmental liabilities as a result of prior operations at an acquired company.

In connection with our acquisition in July 2017 of Conexant Systems, we agreed to assume certain environmental liabilities, including remediation of environmental impacts at a property formerly owned and operated by Conexant (the “Conexant Site”) and for potential future claims alleging personal injury or property damage related to the environmental impacts at and about the Conexant Site. We continue to incur costs to investigate and remediate the Conexant Site’s environmental impacts, and we are at risk for future personal injury and property damage claims related to the Conexant Site. Various federal, state, and local authorities regulate the release of hazardous substances into the environment and can impose substantial fines if our remediation efforts at or about the Conexant Site fail or are deemed inadequate. In addition, changes in laws, regulations and enforcement policies, the discovery of previously unknown contamination at the Conexant Site, the implementation of new technology at the Conexant Site, or the establishment or imposition of stricter federal, state, or local cleanup standards or requirements with respect to the Conexant Site could require us to incur additional costs in the future that could have a negative effect on our financial condition or results of operations.

Risks Factors Related to Our Indebtedness

Our indebtedness could adversely affect our financial condition or operating flexibility and prevent us from fulfilling our obligations outstanding under our credit agreement, our 4.000% senior notes due 2029, or the Senior Notes, and other indebtedness we may incur from time-to-time.

On March 11, 2021, we completed the offering of the Senior Notes in the aggregate principal amount of $400.0 million, with a corresponding amendment and restatement of our credit agreement, or as amended and supplemented, the Credit Agreement, with the lenders party thereto, or the Lenders, and Wells Fargo Bank, National Association, or the Administrative Agent, as administrative agent for the Lenders. The Senior Notes include a mandatory semi-annual payment of a 4.000% coupon. We are permitted under the indenture governing our Senior Notes and the Credit Agreement to incur additional debt

under certain conditions, including additional secured debt. If new debt were to be incurred in the future, the related risks that we now face could intensify.

Our level of indebtedness could have significant consequences on our future operations, including:

Our business may not generate sufficient cash flow from operations and future borrowings may not be available to us under the Credit Agreement, the indenture governing the Senior Notes or otherwise in an amount sufficient to enable us to pay our debt or to fund our other liquidity needs.

Rising interest rates increase the cost of our outstanding borrowings under our Term Loan Facility and could adversely affect our net income or loss.

Our Term Loan Facility is a variable-rate obligation that exposes us to interest rate risk. When interest rates increase, our debt service obligations and our interest expense increase, even if our outstanding borrowings remain the same. Our net income and cash flows, including cash available for servicing indebtedness, will correspondingly decrease.

The covenants in the Credit Agreement and Senior Notes impose restrictions that may limit our operating and financial flexibility.

The Credit Agreement includes certain covenants that limit (subject to certain exceptions) our ability to, among other things: (i) incur or guarantee additional indebtedness; (ii) incur or suffer to exist liens securing indebtedness; (iii) make investments; (iv) consolidate, merge or transfer all or substantially all of our assets; (v) sell assets; (vi) pay dividends or other distributions on, redeem or repurchase capital stock; (vii) enter into transactions with affiliates; (viii) amend, modify, prepay or redeem subordinated indebtedness; (ix) enter into certain restrictive agreements; and (x) engage in a new line of business. In addition, the Credit Agreement contains financial covenants that (i) require the ratio of the amount of our consolidated total indebtedness to consolidated EBITDA to be less than certain maximum ratio levels, and (ii) require that we either maintain a minimum of $450.0 million in cash on our balance sheet or maintain the ratio of the amount of our consolidated EBITDA to consolidated interest expense above a certain minimum ratio level, and we currently rely on maintaining this minimum cash balance in order to comply with this covenant.

If we violate these covenants and are unable to obtain waivers, our debt under the Credit Agreement would be in default and could be accelerated, and could permit, in the case of secured debt, the lenders to foreclose on our assets securing the Credit Agreement. If the indebtedness is accelerated, we may not be able to repay our debt or borrow sufficient funds to refinance it. Even if we are able to obtain new financing, it may not be on commercially reasonable terms or on terms that are acceptable to us. If our debt is in default for any reason, our cash flows, results of operations or financial condition could be materially and adversely affected. In addition, complying with these covenants may also cause us to take actions that may make it more difficult for us to successfully execute our business strategy and compete against companies that are not subject to such restrictions.

General Risk Factors

Our business is dependent upon the proper functioning of our internal business processes and information systems and modification or interruption of such systems may disrupt our business.

We rely upon a number of internal business processes and information systems to support key business functions, and the efficient operation of these processes and systems is critical to our business. Our business processes and information systems need to be sufficiently scalable to support the growth of our business and, accordingly, our information systems will continually evolve and adapt in order to meet our business needs.

These changes may be costly and disruptive to our operations and could impose substantial demands on management time. These changes may also require changes in our information systems, modification of internal control procedures and significant training of employees and third-party resources. We continuously work on simplifying our information systems and applications through consolidation and standardization efforts. There can be no assurance that our business and operations will not experience any disruption in connection with this transition. Our information technology systems, and those of third-party information technology providers or business partners, may also be vulnerable to damage or disruption caused by circumstances beyond our control including catastrophic events, power anomalies or outages, natural disasters, viruses or malware, cyberattacks, insider threat attacks, unauthorized system or data modifications, data breaches and computer system or network failures, exposing us to significant cost, reputational harm and disruption or damage to our business.

We face risks associated with security breaches or cyberattacks.

We face risks associated with security breaches or cyberattacks of our computer systems or those of our third-party representatives, vendors, and service providers. Although we have implemented security procedures and controls to address these threats, our systems may still be vulnerable to data theft, computer viruses, programming errors, ransomware, and other attacks by third parties, or similar disruptive problems. If our systems, or systems owned by third parties affiliated with our company, were breached or attacked, the proprietary and confidential information of our company, our employees and our customers could be disclosed and we may be required to incur substantial costs and liabilities, including the following: liability for stolen assets or information; fines imposed on us by governmental authorities for failure to comply with privacy laws or for disclosure of any personally identifiable information as a part of such attack; costs of repairing damage to our systems; lost revenue and income resulting from any system downtime caused by such breach or attack; loss of competitive advantage if our proprietary information is obtained by competitors as a result of such breach or attack; increased costs of cyber security protection; costs of incentives we may be required to offer to our customers or business partners to retain their business; damage to our reputation; increased cyber liability and data breach insurance premiums; and expenses to rectify the consequences of the security breach or cyberattack. Third parties with which we conduct business, such as foundries, assembly and test contractors, and distributors, have access to certain portions of our sensitive data, and we rely on third parties to store and otherwise process data for us. We are dependent on the information security systems of these third parties and they face substantial security risks similar to those outlined above. Any security breaches or incidents or other unauthorized access by third parties to the systems of our suppliers, service providers, or other third parties with access to our sensitive data, or the existence of computer viruses, ransomware or other malicious code in their data, software, or hardware, could result in disruptions or failures of systems used in our business. Any of the foregoing, or the perception any of them has occurred, could have a material adverse impact on our business, operations and financial results. In addition, any compromise of security from a security breach or cyberattack could deter customers or business partners from entering into transactions that involve providing confidential information to us. As a result, any compromise to the security of our systems could have a material adverse effect on our business, reputation, financial condition, and operating results.

If tax laws change in the jurisdictions in which we do business or if we receive a material tax assessment in connection with an examination of our income tax returns, our consolidated financial position, results of operations and cash flows could be adversely affected.

We are subject to U.S. federal, state, and foreign income taxes in the various jurisdictions in which we do business. In addition, we are required to pay U.S. federal taxes on the operating earnings of certain of our foreign subsidiaries. Our future effective tax rates and the value of our deferred tax assets could be adversely affected by changes in tax laws in the U.S. or in the foreign jurisdictions in which we operate. In addition, we are subject to the examination of our income tax returns by the tax authorities in the jurisdictions in which we do business. The calculation of tax liabilities involves significant judgment in estimating the impact of uncertainties in the application of highly complex tax laws. Our results have in the past, and could in the future, include favorable and unfavorable adjustments to our estimated tax liabilities in the period a determination of such estimated tax liability is made or resolved, upon the filing of an amended return, upon a change in facts, circumstances, or interpretation, or upon the expiration of a statute of limitation. While we believe we have adequately provided for reasonably

foreseeable outcomes in connection with the resolution of income tax uncertainties, the resolution of these uncertainties in a manner inconsistent with our expectations could have a material impact on our consolidated financial position, result of operations, or cash flows.

The Organization for Economic Co-operation and Development (OECD) introduced Pillar Two Model Rules for a global minimum tax of 15% applicable to large multinational corporations. Many countries in which we have business operations, including the United Kingdom, Switzerland, and Japan, have implemented certain aspects of Pillar Two, which will apply to our company in fiscal 2025. We will report Pillar Two related costs, if any, as period costs in our financial statements beginning in fiscal 2025. Based on current legislation, Pillar Two is not expected to significantly affect our effective tax rate or cash flows in the next fiscal year. We will keep track of any new developments and legislative changes that may emerge from the OECD and its member countries regarding Pillar Two and evaluate the impact, if any, on our effective tax rate and cash flows, and record relevant costs as incurred.

Our effective tax rate may be volatile from period to period and impact our net income.

A number of factors can drive volatility in our effective tax rate from period to period, which could cause significant variability in our financial results and cash payments including:

We are subject to governmental laws, regulations and other legal obligations related to privacy and data protection.

We collect, use, and store personally identifiable information, or PII, as part of our business and operations. We are subject to federal, state, and international laws relating to the collection, use, retention, security, and transfer of PII. The legislative and regulatory framework for privacy and data protection issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. The cost of complying with and implementing these privacy-related and data governance measures could be significant as they may create additional burdensome security, business process, business record or data localization requirements. The theft, loss or misuse of PII collected, used, stored or transferred by us, our any inability, or perceived inability, to adequately address privacy and data protection concerns, even if unfounded, or our failure to comply with applicable laws, regulations, policies, industry standards, contractual obligations or other legal obligations, could result in additional cost and liability to us, including litigation, which could have an adverse effect on our business, operating results, cash flows, and financial condition.

Environmental, social and governance (“ESG”) matters may adversely affect our relationships with customers and investors.

There is an increasing focus from lawmakers, regulators, investors, customers, employees and other stakeholders concerning ESG matters, including environment, climate, diversity and inclusion, human rights and governance transparency. A number of our customers have adopted, or may adopt, procurement policies that include ESG provisions or requirements

that their suppliers should comply with, or they may seek to include such provisions or requirements in their procurement terms and conditions. An increasing number of investors are also requiring companies to disclose ESG-related policies, practices and metrics. In addition, various jurisdictions are developing climate-related laws or regulations that could cause us to incur additional direct costs for compliance, as well as indirect costs resulting from our customers, suppliers, or additional compliance costs that are passed on to us. These legal and regulatory requirements, as well as investor expectations on ESG practices and disclosures, are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with, given the complexity of our supply chain and our outsourced manufacturing. Further, there is an increasing number of anti-ESG initiatives in areas of the United States and elsewhere that may conflict with other regulatory requirements or our various stakeholders’ expectations. If we fail to comply with or meet the evolving legal and regulatory requirements or expectations of our various stakeholders, we may be subject to enforcement actions, required to pay fines, customers may stop purchasing products from us or investors may sell their shares, which could harm our reputation, revenue and results of operations. Additionally we may be subject to litigation and claims by third parties or regulatory bodies that our stated ESG initiatives and objectives have not been achieved or implemented appropriately. Our actual or perceived failure to achieve our ESG-related initiatives could negatively impact our reputation or harm our business.

Our charter documents and Delaware law could make it more difficult for a third-party to acquire us and discourage a takeover.

Our certificate of incorporation and the Delaware General Corporation Law contain provisions that may have the effect of making more difficult or delaying attempts by others to obtain control of our company, even when such attempts may be in the best interests of our stockholders. Our certificate of incorporation also authorizes our Board of Directors, without stockholder approval, to issue one or more series of preferred stock, which could have voting and conversion rights that adversely affect or dilute the voting power of the holders of our common stock. Delaware law also imposes conditions on certain business combination transactions with “interested stockholders.” Our certificate of incorporation divides our Board of Directors into three classes, with one class to stand for election each year for a three-year term after the election, which will be phased out over a three-year period concluding at our 2026 annual meeting of stockholders. The classification of directors tends to discourage a third-party from initiating a proxy solicitation or otherwise attempting to obtain control of our company and may maintain the incumbency of our Board of Directors, as this structure generally increases the difficulty of, or may delay, replacing a majority of directors. Our certificate of incorporation authorizes our Board of Directors to fill vacancies or newly created directorships. A majority of the directors then in office may elect a successor to fill any vacancies or newly created directorships, thereby increasing the difficulty of, or delaying a third-party’s efforts in, replacing a majority of directors.

The market price of our common stock has been and may continue to be volatile.

The trading price of our common stock has been and may continue to be subject to wide fluctuations in response to various factors, including the following:

In addition, stocks of technology companies have experienced extreme price and volume fluctuations that often have been unrelated or disproportionate to these companies’ operating performance. Public announcements by technology companies concerning, among other things, their performance, accounting practices, or legal problems could cause the market price of our common stock to decline regardless of our actual operating performance.

ITEM 1B. UNRESOLVED STAFF COMMENTS

Not applicable.

ITEM 1C. CYBERSECURITY

Risk Management and Strategy

Our cybersecurity risk management program is part of our overall approach to enterprise risk management. Our cybersecurity risk management program seeks to protect our information systems by managing and reducing material risks from cybersecurity threats and by responding to and mitigating cybersecurity incidents. We have designed our cybersecurity risk management program using certain industry practices and frameworks as a guide, including those established by the International Organization for Standardization and the National Institute of Standards and Technology, although we may not meet all technical standards, specifications, or requirements. We employ a cross-functional approach to preserving the confidentiality, security and availability of the employee, customer, supplier and partner information that we collect and store.

We have implemented cybersecurity processes, measures and controls to assist management in our assessment, identification and management of risks from cybersecurity threats. Our Information Security team monitors events, analyzes threats, and coordinates our incident response pursuant to our incident response plan, which includes the process to be followed for reporting of incidents. Our cybersecurity risk management involves identifying information assets and potential threats, assessing and prioritizing risks, employing various tools and techniques, including vulnerability scanning and penetration testing. Based on the risk assessment, appropriate security measures are implemented. We conduct annual and ongoing security awareness and behavioral change training for employees to educate them on cybersecurity best practices and train them to recognize phishing attempts. We also assess and manage cybersecurity risks associated with third-party service providers, including those in our supply chain or vendors who have access to our data or systems. Our cybersecurity process is iterative, with regular reviews and updates to help improve and respond to a dynamic and continuously evolving threat landscape.

We describe whether and how risks from cybersecurity threats have materially affected or are reasonably likely to materially affect us, our business strategy, results of operations, or financial condition under the heading “We face risks associated with security breaches or cyberattacks," included as part of our risk factors disclosures in Item 1A. Risk Factors of this Annual Report on Form 10-K.

In the last three fiscal years, we have not experienced a cybersecurity incident which has been determined to be material, and the expenses we have incurred from cybersecurity incidents and threats were immaterial, including penalties and settlements, of which there were none.

Governance

Our Board of Directors is responsible for risk management oversight and has delegated to our Audit Committee oversight responsibility for reviewing the effectiveness of our governance and management of cybersecurity risks. The Audit Committee biannually reviews our policies and practices with respect to risk management, including cybersecurity risks, and reports its findings to the full Board of Directors. The Audit Committee also receives a report containing information security risk posture details, remediation plan execution progress and pertinent threat intelligence updates from the Chief Information Security Officer (“CISO”) and Sr. Director of Internal Audit on a biannual basis. At least annually, but more frequently as necessary, threats from cybersecurity risks and our action plans relating to those risks also are considered by the full Board during meeting discussions of enterprise risks. Members of management, including the Chief Executive Officer, Chief Financial Officer, Chief Information Officer, and Chief Legal Officer may also report directly to the Board of Directors on significant risk management issues, including cybersecurity threats and incidents.

We have an Information Security Management Steering Committee (the “ISMS Committee”), comprised of our CISO, as well as members of our executive team, including our Chief Information Office and Chief Legal Officer. Our Chief Information Officer and CISO, in coordination with the ISMS Committee, work collaboratively to implement our enterprise-wide cybersecurity strategy, policy, standards, architecture, and processes. Our InfoSec team communicates with and reports to the CISO, enabling the CISO, CIRT, and ISMS Committee to monitor the prevention, detection, mitigation, and remediation of cybersecurity incidents. Our CISO has over 28 years of experience managing global IT operations, including strategy, applications, infrastructure, information security, support and execution.

ITEM 2. PROPERTIES

Our principal executive offices, as well as our principal research and development, sales, marketing, and administrative functions, are located in San Jose, California, where we lease office space of approximately 111,000 square feet.

We also have other U.S. based research and development functions in leased offices in California, Georgia, and Massachusetts.

Our facilities outside of the U.S. include two Asia Pacific offices located in leased offices in Hong Kong and Japan, where we have sales, operations, and research and development functions. We have a leased facility with logistics operations in Taiwan, leased facilities with sales and support operations in China, Hong Kong, Japan, Korea, Switzerland, and Taiwan, and leased facilities with engineering design support operations in China, France, Germany, India, Israel, Japan, Korea, Poland, Switzerland, Taiwan and the U.K.

ITEM 3. LEGAL PROCEEDINGS

We are party to various litigation matters and claims arising from time-to-time in the ordinary course of business. While the results of such matters cannot be predicted with certainty, we believe that the final outcome of such matters will not have a material adverse effect on our business, financial condition, results of operations or cash flows.

For further information regarding current legal proceedings, see Note 10, Indemnifications and Contingencies in the notes to the consolidated financial statements.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information on Common Stock

Our common stock has been listed on the Nasdaq Global Select Market (formerly the Nasdaq National Market) under the symbol "SYNA" since January 29, 2002. Prior to that time, there was no public market for our common stock.

Stockholders

As of August 16, 2024, there were approximately 110 holders of record of our common stock. The closing price of our common stock as quoted on the Nasdaq Global Select Market, as of August 16, 2024, was $76.38.

Dividends

We have never declared or paid cash dividends on our common stock. We currently plan to retain all earnings to finance the growth of our business, make our debt payments, or purchase shares under our common stock repurchase program. Payments of any cash dividends in the future will depend on our financial condition, operating results, and capital requirements, as well as other factors deemed relevant by our Board of Directors.

Our Credit Agreement and the indenture governing our Senior Notes also place restrictions on the payment of any dividends. For a further description of the terms of the Credit Agreement and our Senior Notes indenture, see Note 8. Debt to the consolidated financial statements contained elsewhere in this report.

Stock-Based Compensation

For information on securities authorized for issuance under our equity compensation plans, see Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Issuer Purchases of Equity Securities

From April 2005 through April 2023, our Board of Directors cumulatively authorized the repurchase of up to $2.3 billion for our common stock under our stock repurchase program, which expires in July 2025. As of the end of fiscal 2024, the remaining amount authorized for repurchase under our stock repurchase program was $893.9 million. During the three-month period ended June 29, 2024, there were no repurchases under the stock repurchase program.

Performance Graph

The following line graph compares cumulative total stockholder returns for the five years ended June 29, 2024 for (i) our common stock, (ii) the Nasdaq Composite Index and (iii) the Russell 2000 Index. The graph assumes an investment of $100 on June 30, 2019. The calculations of cumulative stockholder return on the Nasdaq Composite Index and the Russell 2000 Index include reinvestment of dividends. The calculation of cumulative stockholder return on our common stock does not include reinvestment of dividends because we did not pay any dividends during the measurement period. The historical performance shown is not necessarily indicative of future performance.

The performance graph above shall not be deemed “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section. The performance graph above will not be deemed incorporated by reference into any filing of our company under the Exchange Act or the Securities Act.

ITEM 6. RESERVED

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-Looking Statements and Factors That May Affect Results

You should read the following discussion and analysis in conjunction with our financial statements and related notes contained elsewhere in this report. This discussion contains forward-looking statements that involve risks, uncertainties, and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a variety of factors, including those set forth elsewhere in this report and under Item 1A. Risk Factors.

Overview

We are a leading worldwide developer and fabless supplier of premium mixed signal semiconductor solutions changing the way humans engage with connected devices and data, engineering exceptional experiences throughout the home, at work, in the car and on the go. We believe our results to date reflect the combination of our customer focus and the strength of our intellectual property and our engineering know-how, which allow us to develop or engineer products that meet the demanding design specifications of our OEMs.

We recognize revenue when control of the promised goods or services is transferred to our customers in an amount that reflects the consideration we expect to receive in exchange for those goods or services. Nearly all of our revenue, except an inconsequential amount, is recognized at a point in time, either on shipment or delivery of the product, depending on customer terms and conditions.

Revenue recognition from the licensing of our IP is dependent on the nature and terms of each agreement. We recognize revenue from the licensing of our IP upon delivery of the IP if there are no substantive future obligations to perform under the arrangement. Sales-based or usage-based royalties from the license of IP are recognized at the later of the period the sale or usage occurs, or the satisfaction of the performance obligation to which some or all of the sales-based or usage-based royalties have been allocated.

Many of our customers have manufacturing operations in China, and many of our OEM customers have established design centers in Asia. With our global presence, including offices in China, France, Germany, Hong Kong, India, Israel, Japan, Korea, Poland, Switzerland, Taiwan, the U.K., and the U.S., we are well positioned to provide local sales, operational, and engineering support services to our existing customers, as well as potential new customers, on a global basis.

Our manufacturing operations are based on a variable cost model in which we outsource all of our production requirements and generally drop ship our products directly to our customers from our contract manufacturers’ facilities, eliminating the need for significant capital expenditures and allowing us to minimize our investment in inventories. This approach requires us to work closely with our contract manufacturers and semiconductor fabricators to ensure adequate production capacity to meet our forecasted volume requirements. We use third-party wafer manufacturers to supply wafers and third-party packaging manufacturers to package our proprietary ASICs. In certain cases, we rely on a single source, or a limited number of suppliers, to provide other key components of our products. Our cost of revenue includes all costs associated with the production of our products, including materials; logistics; amortization of intangibles related to acquired developed technology; backlog; supplier arrangements; manufacturing, assembly, royalties paid to third-party intellectual property providers and test costs paid to third-party manufacturers; and related overhead costs associated with our indirect manufacturing operations personnel. Additionally, we charge all warranty costs, losses on inventory purchase obligations, and the provision for excess and obsolete inventories to cost of revenue.

Our gross margin generally reflects the combination of the added value we bring to our OEM customers’ products by meeting their custom design requirements and the impact of our ongoing cost-improvement programs. These cost-improvement programs include reducing materials and component costs and implementing design and process improvements. Our newly introduced products may have lower margins than our more mature products, which have realized greater benefits associated with our ongoing cost-improvement programs. As a result, new product introductions may initially negatively impact our gross margin.

Our research and development expenses include costs for supplies and materials related to product development, as well as the engineering costs incurred to design ASICs and human experience solutions for OEM customers prior to and after our OEMs’ commitment to incorporate those solutions into their products. In addition, we expense in-process research and development projects acquired as part of an asset acquisition, which have not yet reached technological feasibility, and which have no foreseeable alternative future use. We continue to commit to the technological and design innovation required to maintain our position in our existing markets, and to adapt our existing technologies or develop new technologies for new markets.

Selling, general, and administrative expenses include expenses related to sales, marketing, and administrative personnel; internal sales and outside sales representatives’ commissions; market and usability research; outside legal, accounting, and consulting costs; and other marketing and sales activities.

Acquired intangibles amortization, included in operating expenses, consists primarily of amortization of customer relationship and tradename intangible assets recognized under the purchase method for business combinations.

Intangible asset impairment charges during fiscal 2024 were $16.0 million. During fiscal 2024, we recorded an indefinite-lived intangible asset impairment charge of $16 million on our in-process research and development, or IPR&D, from our December 2021 acquisition of DSPG. See Note 7. Goodwill and Acquired Intangible Assets in the notes to the consolidated financial statements for additional information.

Restructuring costs primarily reflect severance costs related to the restructuring of our operations to reduce operating expenses and gain efficiencies from our recent acquisitions. See Note 16. Restructuring Activities in the notes to the consolidated financial statements for additional information.

Interest and other expense, net, primarily reflects interest expense on our Senior Notes (as defined herein), Term Loan Facility (as defined herein) and revolving line of credit as well as the amortization of debt issuance costs and discount on our debt, partially offset by interest income earned on our cash, cash equivalents and short-term investments.

Acquisitions

Broadcom

In February 2023, we completed the acquisition of certain GPS developed technology intangible assets from Broadcom for an aggregate consideration of $30.0 million, which was paid in cash in the previous fiscal year.

In July 2023, we entered into a transaction with Broadcom to extend the exclusivity period of certain developed technologies and to license certain technology assets for an aggregate consideration of $130.0 million, which was paid in cash in the first quarter of fiscal 2024.

Emza

On October 25, 2022, we acquired all of the outstanding shares of Emza for total purchase consideration of $15.8 million, which was paid in cash. The results of Emza are included in our consolidated financial statements for the periods from October 25, 2022.

Critical Accounting Policies and Estimates

The preparation of consolidated financial statements in conformity with U.S. generally accepted accounting principles, or GAAP, requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue, expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to revenue recognition, allowance for doubtful accounts, cost of revenue, inventories, product warranty, share-based compensation costs, provision for income taxes, deferred income tax asset, valuation allowances, uncertain tax positions, tax contingencies, goodwill, intangible assets, investments, and contingencies. We base our estimates on historical experience, applicable laws and regulations, and various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

The methods, estimates, interpretations, and judgments we use in applying our most critical accounting policies can have a significant impact on the results that we report in our consolidated financial statements. The SEC considers an entity’s most critical accounting policies to be those policies that are both most important to the portrayal of the entity’s financial condition and results of operations and those that require the entity’s most difficult, subjective, or complex judgments, often as a result of the need to make assumptions and estimates about matters that are inherently uncertain. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements:

Revenue Recognition

Our revenue is primarily generated from the sale of ASIC chips, either directly to a customer or to a distributor. Revenue is recognized when control of the promised goods or services is transferred to our customers, in an amount that reflects the consideration we expect to receive in exchange for those goods or services. All of our revenue, except an inconsequential amount, is recognized at a point in time, either on shipment or delivery of the product, depending on customer terms and conditions. We generally warrant our products for a period of 12 months from the date of sale and estimate probable product warranty costs at the time we recognize revenue as the warranty is considered an assurance warranty and not a performance obligation. Non-product revenue is recognized over the same period of time such performance obligations are satisfied. We then select an appropriate method for measuring satisfaction of the performance obligations.

Revenue from sales to distributors is recognized upon shipment of the product to the distributors (sell-in basis). Master sales agreements are in place with certain customers, and these agreements typically contain terms and conditions with respect to payment, delivery, warranty, and supply. In the absence of a master sales agreement, we consider a customer's purchase order or our standard terms and conditions to be the contract with the customer.

Rights to our intellectual property, or IP, are either sold or licensed to customers. Revenue recognition from the licensing of our IP is dependent on the nature and terms of each agreement. We recognize revenue from the licensing of our IP upon delivery of the IP if there are no substantive future obligations to perform under the arrangement. Sales-based or usage-based royalties from the license of IP are recognized at the later of the period the sale or usage occurs, or the satisfaction of the performance obligation to which some or all of the sales-based or usage-based royalties have been allocated.

Our pricing terms are negotiated independently, on a stand-alone basis. In determining the transaction price, we evaluate whether the price is subject to refund or adjustment to determine the net consideration which we expect to receive for the sale of such products. In limited situations, we make sales to certain customers under arrangements where we grant stock rotation rights, price protection and price allowances; variable consideration associated with these rights is expected to be inconsequential. These adjustments and incentives are accounted for as variable consideration, classified as other current liabilities under the new revenue standard and are shown as customer obligations within Other Accrued Liabilities as disclosed in Note 1 Organization and Summary of Significant Accounting Policies in the notes to the consolidated financial statements. We estimate the amount of variable consideration for such arrangements based on the expected value to be provided to customers, and we do not believe that there will be significant changes to our estimates of variable consideration. When incentives, stock rotation rights, price protection, volume discounts, or price allowances are applicable, they are estimated and recorded in the period the related revenue is recognized. Stock rotation reserves are based on historical return rates applied to distributor inventory subject to stock rotation rights and recorded as a reduction to revenue with a corresponding reduction to cost of goods sold for the estimated cost of inventory that is expected to be returned and recorded as prepaid expenses and other current assets. In limited circumstances, we enter into volume-based tiered pricing arrangements and we estimate total unit volumes under such arrangement to determine the expected transaction price for the units expected to be transferred. Such arrangements are accounted for as contract liabilities within other accrued liabilities. Sales returns liabilities are recorded as refund liabilities within other accrued liabilities.

Our accounts receivable balance is from contracts with customers and represents our unconditional right to receive consideration from customers. Payments are generally due within three months of completion of the performance obligation and subsequent invoicing and, therefore, do not include significant financing components. To date, there have been no material impairment losses on accounts receivable.

We invoice customers and recognize all of our revenue, except an inconsequential amount, at a point in time, either on shipment or delivery of the product, depending on customer terms and conditions. We account for shipping and handling costs as fulfillment costs before the customer obtains control of the goods. We continue to account for collection of all taxes on a net basis.

We incur commission expense that is incremental to obtaining contracts with customers. Sales commissions (which are recorded in the selling, general and administrative expense line item in the consolidated statements of operations) are expensed when the product is shipped because such commissions are owed after shipment.

Inventory Valuation

We state our inventories at the lower of cost or net realizable value. We base our assessment of the ultimate realization of inventories on our projections of future demand and market conditions. Sudden declines in demand, rapid product improvements, or technological changes, or any combination of these factors can cause us to have excess or obsolete inventories. On an ongoing basis, we review for estimated excess, obsolete, or unmarketable inventories and write down our inventories to their net realizable value based on our forecasts of future demand and market conditions. If actual market conditions are less favorable than our forecasts, additional inventory write-downs may be required. The following factors influence our estimates: changes to or cancellations of customer orders, unexpected or sudden decline in demand, rapid product improvements, technological advances, and termination or changes by our OEM customers of any product offerings incorporating our product solutions.

Periodically, we purchase inventory from our contract manufacturers when a customer delays its delivery schedule or cancels its order. In those circumstances, we record a write-down, if necessary, to reduce the carrying value of the inventory purchased to its net realizable value. The effect of these write-downs is to establish a new cost basis in the related inventory, which we do not subsequently write up. We also record a liability and charge to cost of revenue for estimated losses on inventory we are obligated to purchase from our contract manufacturers when such losses become probable from customer delays, order cancellations, or other factors.

Business Combinations

We allocate the fair value of the purchase consideration of a business acquisition to the tangible assets, liabilities, and intangible assets acquired, including in-process research and development (“IPR&D”), based on their estimated fair values. The excess of the fair value of purchase consideration over the fair values of these identifiable assets and liabilities is recorded as goodwill. IPR&D is initially recorded at fair value as an intangible asset with an indefinite life and assessed for impairment thereafter. When an IPR&D project is completed, IPR&D is reclassified as an amortizable intangible asset and amortized over the asset’s estimated useful life. Our valuation of acquired assets and assumed liabilities requires significant estimates, especially with respect to intangible assets. The valuation of intangible assets requires that we use valuation techniques such as the income approach that includes the use of a discounted cash flow model, which includes discounted cash flow scenarios and requires the following significant estimates: future expected revenue, expenses, capital expenditures and other costs, and

discount rates. We estimate the fair value based upon assumptions we believe to be reasonable, but which are inherently uncertain and unpredictable and, as a result, actual results may differ from estimates. Estimates associated with the accounting for acquisitions may change as additional information becomes available regarding the assets acquired and liabilities assumed. Acquisition-related expenses and related restructuring costs are recognized separately from the business combination and are expensed as incurred.

Income Taxes

We estimate our income taxes in each of the jurisdictions in which we operate. This process involves estimating our actual tax exposure together with assessing temporary differences resulting from the differing treatment of certain items for tax return and financial statement purposes. These differences result in deferred tax assets and liabilities, which are included in our consolidated balance sheets.

We recognize income taxes using an asset and liability approach. This approach requires the recognition of taxes payable or refundable for the current year, and deferred tax liabilities and assets for the future tax consequences of events that have been recognized in our consolidated financial statements or tax returns. The measurement of current and deferred taxes is based on the provisions of enacted tax law and the effects of future changes in tax laws or rates are not anticipated. Taxes payable on Global Intangible Low-Taxed Income, or GILTI, inclusions in the U.S. are recognized as a current period expense when incurred.

Evaluating the need for a valuation allowance for deferred tax assets requires judgment and analysis of all positive and negative evidence available, including recent earnings history and taxable income in recent years, reversals of deferred tax liabilities, projected future taxable income, and tax planning strategies to determine whether all or some portion of the deferred tax assets will not be realized. Using available evidence and judgment, we establish a valuation allowance for deferred tax assets when it is determined that it is more likely than not that they will not be realized. Valuation allowances have been provided primarily against state research and development credits and certain capital losses of foreign subsidiaries. A change in the assessment of the realizability of deferred tax assets may materially impact our tax provision in the period in which a change of assessment occurs.

As a multinational corporation, we conduct our business in many countries and are subject to taxation in many jurisdictions. The taxation of our business is subject to the application of various and sometimes conflicting tax laws and regulations as well as multinational tax conventions. Our effective tax rate is highly dependent upon the geographic distribution of our worldwide earnings or losses, tax laws and regulations in various jurisdictions, tax incentives, the availability of tax credits and loss carryforwards, and the effectiveness of our tax planning strategies, which includes our estimates of the fair value of our intellectual property. The application of tax laws and regulations is subject to legal and factual interpretation, judgment and uncertainty. Tax laws themselves are subject to change as a result of changes in fiscal policy, changes in legislation, and the evolution of regulations and court rulings and tax audits. There can be no assurance that we will accurately predict the outcome of audits, and the amounts ultimately paid on resolution of audits could be materially different than the amounts previously included in our income tax expense and therefore, could have a material impact on our tax provision, results of operations, and cash flows. Consequently, taxing authorities may impose tax assessments or judgments against us that could materially impact our tax liability and/or our effective income tax rate.

We are subject to income tax audits by the respective tax authorities in the jurisdictions in which we operate. We recognize the effect of income tax positions only if these positions are more likely than not to be sustained. Recognized income tax positions are measured at the largest amount that is more than 50% likely to be realized. Changes in recognition or measurement with respect to our uncertain tax positions are reflected in the period in which a change in judgment occurs. We record interest and penalties related to unrecognized tax benefits in income tax expense. The calculation of our tax liabilities involves the inherent uncertainty associated with complex tax laws. We believe we have adequately provided for in our financial statements additional taxes that we estimate to be required as a result of such examinations. While we believe that we have adequately provided for all tax positions, amounts asserted by tax authorities could be greater or less than our accrued position. Any unpaid tax liabilities, including the interest and penalties, are released pursuant to a final settlement with tax authorities, completion of audit or expiration of various statutes of limitation. The material jurisdictions in which we are subject to potential examination by tax authorities throughout the world include Japan, India, Hong Kong, United Kingdom, Israel and the United States.

The recognition and measurement of income taxes payable or refundable, and deferred tax assets and liabilities require that we make certain estimates and judgments. Changes to these estimates or judgments may have a material effect on our income tax provision in a future period.

Goodwill

Goodwill is the excess of the aggregate of the consideration transferred over the identifiable assets acquired and liabilities assumed in connection with business combinations. Our goodwill is contained within three product categories: Core IoT, Enterprise and Automotive and Mobile.

We perform our goodwill impairment analysis in the fourth quarter of each year and, if certain events or circumstances indicate that an impairment loss may have been incurred, on a more frequent basis. The analysis may include both qualitative and quantitative factors to assess the likelihood of an impairment, which occurs when the carrying value of a reporting unit exceeds its fair value. Our qualitative assessment of the recoverability of goodwill, whether performed annually or based on specific events or circumstances, considers various macroeconomic, industry-specific and company-specific factors. These factors include: (i) adverse industry or economic trends; (ii) significant company-specific actions, including exiting an activity in conjunction with restructuring of operations; (iii) current, historical or projected deterioration of our financial performance; or (iv) a sustained decrease in our market capitalization below our net book value. After assessing the totality of events and circumstances, if we determine that it is not more likely than not that the fair value of any of our reporting units is less than its carrying amount, no further assessment is performed. If we determine that it is more likely than not that the fair value of any of our reporting units is less than its carrying amount, we calculate the fair value of that reporting unit and compare the fair value to its net book value.

We elected to perform the qualitative assessment of impairment for our reporting unit for the fiscal 2024 impairment test. Based on this impairment test, we concluded it was not more likely than not that the fair value of the reporting unit was less than its carrying amount.

Trends and Uncertainties

Current Economic Conditions

As a majority of our sales and manufacturing occurs outside of the United States, we are exposed to and impacted by global macroeconomic factors, U.S. and foreign government policies and foreign exchange fluctuations. There is uncertainty surrounding macroeconomic factors in the U.S., and globally, characterized by the supply chain environment, inflationary pressure, rising interest rates, and workforce reductions. We believe these macroeconomic conditions, including soft corporate spending on information technology hardware, coupled with the global political climate and unrest, including the ongoing Israel-Hamas war, continue to be the primary drivers for the overall reduction in orders from our customer base. We continue to believe a rebound in demand is likely to extend into late calendar 2024, and potentially beyond 2024. In addition, although we currently do not believe inflation in the costs of goods will have a material impact on our results of operations, it is possible that elevated inflation could increase our cost of goods sold and/or operating expenses and reduce our gross profit and net income. Further, interest rates remain elevated and have increased our borrowing costs on our variable rate Term Loan Facility and could potentially limit our borrowing capacity if a future acquisition opportunity requiring financing presents itself.

The Israel-Hamas War

Although our employees in our Israel office have the ability to work remotely and business continuity plans are in place to address any medium- or long-term disruptions that could result from the closure of this office, the office closure and general effects of employees operating in a region at war could have a negative impact on our operations. Further, a number of our employees in Israel are members of the military reserves who have been subject to activation in response to the war, and it is possible that these employees may be re-activated if the Israel-Hamas war continues. While we also have business continuity plans in place to address the safety of our employees and continue product development in the event of reduced employee availability in the region during the war, it could affect the timing of projects in the short-term as work is shifted to other team members where necessary. If these conditions continue or worsen, they could adversely impact our future financial and operating results.

Results of Operations

The following sets forth certain of our consolidated statements of operations data for fiscal 2024 and 2023 along with comparative information regarding the absolute and percentage changes in these amounts (in millions, except percentages):

The following sets forth certain of our consolidated statements of operations data as a percentage of net revenues for fiscal 2024 and 2023: